The Bryant 126BNA Condensers with Puron refrigerant provide a collection of features unmatched by any other family of equipment. The 126B has been designed utilizing Bryant's Puron refrigerant. The environmentally sound refrigerant allows you to make a responsible decision in the protection of the earth's ozone layer.

Standard Features:

• 14 -16.5 SEER / 11.5 - 13.5 EER
• Microtube Technology refrigeration system
• Sound level as low as 72 dBA
• Compressor sound blanket standard
• System supports thermidistat or standard thermostat controls
• Puron refrigerant − environmentally sound, won't deplete the ozone layer and low lifetime servce cost.
• Scroll compressor
• Internal pressure relief valve
• Internal thermal overload
• Filter drier
• High and low pressure switches
• Balanced refrigeration system for maximum reliability
• Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
• Low ambient (down to -20 F/-28.9 C)) with accessory kit

Cabinet Features:

• DuraGuard Plus protection package
• Solid, durable sheet metal construction
• Louvered coil guard
• Baked−on, complete outer coverage, powder paint

The Bryant FX4D Air Handler combines the proven technology of Bryant fan coil units with Puron, the environmentally sound refrigerant. These fan coils are loaded with popular features. Factory-installed, refrigerant-specific thermostatic expansion valves (TXV) are standard with these fan coil designs. The designs feature contoured condensate pans with rugged, drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.

Standard features include grooved copper tubing and louvered aluminum fins. The large face areas of the refrigerant coils provide superior efficiency for high SEER and HSPF performance. Coil circuiting has also been updated to make the most of all Bryant heat pumps and air conditioners. Also units come with solid state fan controls, 1-in (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory- and/or field-installed heaters from 3 to 30kW.

It also should be noted that the unique cabinet design of these fan coils meet new stringent regulations for cabinet air leakage - a requirement of 2 cabinet leakage rate when tested at 1.0 inches of static pressure.

The FX4D fan coil is the Puron refrigeration design loaded with popular features. It comes in a pre-painted (taupe metallic) galvanized steel casing and is shipped with a cleanable, permanent framed filter, and a factory-supplied power plug. DuraCoatt provides a tin plating of the indoor coilž˘s copper hairpins. This creates a barrier between the corrosion-causing elements and the coil. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors.

Standard Features:

• Multi-tap ECM (electronic commutating motor) motors - all sizes
• Integrated motor controls have replaced integrated circuit board
• Large, grooved tube, louvered fin coils
• Efficient, quiet, time-tested blower housings and diffusers
• Sturdy, drainable condensate pans
• Cabinet construction features innovations designed to prevent cabinet sweating
• Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
• Super-thick R-4.2 insulation with vapor barrier
• Pre-painted galvanized steel cabinet (taupe metallic)
• Cabinet design meets stringent regulations for 2 cabinet leakage rate when tested at 1.0 inches static pressure
• Installation-flexible, multipoise units
• Horizontal hanging provisions on cabinet
• No tools required to service filter
• Factory-supplied, cleanable and reusable filter
• Newly improved filter rack area filter door insulation added for improved air seal
• Factory-installed heater packages available (5- through 15-kW)
• 3- through 30-kW accessory heaters - field installed
• Factory-supplied power plug
• Easy plug-in provisions for heater installation
• Entry options for high and low voltage wiring hook-up
• Simple, 5-amp blade fuse (and a spare) to protect 40 VA transformer
• Easy coil inspection (removable, snap-in plug on A-coil models)
• Leak-preventing sweat connections
• Modular cabinets available on 037 through 061 sizes.
• Designed for manufactured housing applications.

Additional Features:

• Puron, environmentally sound refrigerant
• Factory-installed Puron refrigerant thermostatic expansion valves (TXV)
• Factory-installed heater packages available
• DuraCoatt coil protection available