The York YZF Series Heat Pump unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions.

Standard Features:

• Superior Coil Protection - A decorative, stamped metal coil guard completely protects coil from debris and other large damaging material.
• Protected Compressors - Each compressor is protected against high and low pressure as well as excessive temperature. This is accomplished by by the simultaneous operation of a high pressure relief valve and temperature sensors which protect the compressor if undesirable conditions occur.
• Environmentally Friendly Refrigerant - Next generation refrigerant R-410A delivers environmentally friendly performance, with zero ozone depletion.
• Durable Finish - Automotive quality finish provides the ultimate protection from harmful U.V. rays as well as rust creep, ensuring long-lasting, high quality appearance. A powder-paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33 greater durability than conventional powder-coat finishes.
• Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment, allowing easy access to control components along with angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier - A factory installed, solid core liquid line filter-drier filters harmful debris and moisture from the system.
• Easy Service Access - A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base - Strong and durable composite base pan provides added strength while resisting rust and corrosion, as well as reducing sound and vibration.
• QuietDrive System - The swept-wing fan, composite base pan, isolated compressor compartment, and single-stage compressor are engineered as a system to reduce overall sound to a mere whisper. The 5-ton system utilizes a two-stage compressor.
• Complete System Control - All models utilize the exclusive microprocessor based, on-demand, defrost control system. This system provides optimal comfort, efficiency, and constant montoring of the entire system for reliable operation. Defrost cycles occur only when necessary. An adjustable balance point insures supplemental heat is brought on only when required to meet the space load, for optimum efficiency and reliability.
• Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat.
• Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ANSI/AHRI Standard 210/240.

Details

The York YZF Series Heat Pump unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions.


Standard Features:



• Superior Coil Protection - A decorative, stamped metal coil guard completely protects coil from debris and other large damaging material.
• Protected Compressors - Each compressor is protected against high and low pressure as well as excessive temperature. This is accomplished by by the simultaneous operation of a high pressure relief valve and temperature sensors which protect the compressor if undesirable conditions occur.
• Environmentally Friendly Refrigerant - Next generation refrigerant R-410A delivers environmentally friendly performance, with zero ozone depletion.
• Durable Finish - Automotive quality finish provides the ultimate protection from harmful U.V. rays as well as rust creep, ensuring long-lasting, high quality appearance. A powder-paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33 greater durability than conventional powder-coat finishes.
• Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment, allowing easy access to control components along with angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier - A factory installed, solid core liquid line filter-drier filters harmful debris and moisture from the system.
• Easy Service Access - A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base - Strong and durable composite base pan provides added strength while resisting rust and corrosion, as well as reducing sound and vibration.
• QuietDrive System - The swept-wing fan, composite base pan, isolated compressor compartment, and single-stage compressor are engineered as a system to reduce overall sound to a mere whisper. The 5-ton system utilizes a two-stage compressor.
• Complete System Control - All models utilize the exclusive microprocessor based, on-demand, defrost control system. This system provides optimal comfort, efficiency, and constant montoring of the entire system for reliable operation. Defrost cycles occur only when necessary. An adjustable balance point insures supplemental heat is brought on only when required to meet the space load, for optimum efficiency and reliability.
• Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat.
• Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ANSI/AHRI Standard 210/240.

 

• Model Number(s) YZF04213
• Brand York
• Type Heat Pump
• Category Heat Pumps
• Ton 3.5 Ton
• SEER 16
• Capacity N/A
• Heating Input Btu N/A
• Heating Output Btu N/A
• HSPF 7.80
• Cooling Btu 42,000
• Cooling Stage(s) 1
• Compressor Stage Single
• Afue No
• Heating Btu 42,000
• Heating Stage(s) 1
• Blower Application No
• Furnace Configuration No
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) 40
• Hertz (Hz) 60
• Decibel Level (dB) 70
• Blower No
• Maximum CFM 3,800
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 7/8
• Liquid Valve Size (Inches) 3/8
• Min. Operating Temp. (Degrees) -10
• Outdoor Unit Height (Inches) No
• Outdoor Unit Width (Inches) No
• Outdoor Unit Depth (Inches) No
• Indoor Unit Height (Inches) No
• Indoor Unit Width (Inches) No
• Indoor Unit Depth (Inches) No
• Coil Dimensions (W x D x H)(Inches) No
• Height (Inches) 40
• Width (Inches) 42 1/4
• Length (Inches) No
• Depth (Inches) No
• Total Shipping Weight (lbs.) 234
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• Heat Exchanger Warranty (Years) No
• UPC #

Have questions about this product? Ask us here: