The Rheem RCF-H Evaporator Coil is built to perform like a champion. Its all-aluminum construction makes it extra durable, allowing the coil to run better and last longer. Even the endplates are aluminum, so the unit looks as good as it runs. Every coil is factory-tested, checked for leaks and held to the highest industry standards. If it doesn't pass the test, it doesn't go in the box. Were also proud that the coils robust design far exceeds normal operating pressures. Precise heat-control of the automated brazing oven during the brazing process means you get a quality braze joint every time. So, you can guarantee your customers one of the most durable, long-lasting products on the market today.
Standard Features:
Rheem Indoor Furnace cased coils and replacement uncased coils are designed for use with Rheem outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Rheem outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW]
Constructed of aluminum fins bonded to internally grooved aluminum tubing
Coils are tested at the factory with an extensive refrigerant leak check
Coils have copper sweat refrigerant connections
Feature two sets of 3/4 [14.1 mm] N.P.T. Condensate drain connections for ease of connection
Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only)
Cabinet Features:
Approved for system application with variety of Rheem outdoor units.
Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right
Unique drain pan design maximizes application flexibility and condensate removal
N-Coil design maximizes performance and minimizes height required at installation
Coils are AHRI certified for system application with a variety of Rheem outdoor units
**IMPORTANT NOTE** SINGLE EVAPORATOR COILS ARE SHIPPED VIA GROUND TRANSIT SERVICES. UPON UNPACKING YOUR EQUIPMENT, YOU MAY FIND THAT SOME OF THE COIL FINS ARE SLIGHTLY BENT. BENT FINS ON YOUR EVAPORATOR OR CONDENSER COIL ARE COMPLETELY NORMAL AND HAPPENS DURING THE MANUFACTURING AND ASSEMBLY PROCESS, NOT DURING TRANSIT. BENT FINS WILL NOT IMPEDE THE FUNCTIONALITY OF YOUR EQUIPMENT AND DOES NOT CONSTITUTE EQUIPMENT "DAMAGE". CLAIMS CANNOT BE FILED FOR BENT FINS. UNLESS THERE IS VISIBLE DAMAGE TO THE EXTERNAL PACKAGING AND/OR PANELS OF THE UNIT, THESE CLAIMS CANNOT BE ACKNOWLEDGED.