The Bryant FB4C Air Handler has the proven technology of Bryant fan coil units with Puron refrigerant as well as vertical and horizontal applications. The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate. Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all Bryant heat pumps and air conditioners. Units come with solid state fan controls, 1, 25mm thick insulation with R-value of 4.2, multi-speed motors, and fully-wet table coils. Units can accommodate factory and/or field-installed heaters from 3 to 30kW.It also should be noted that the unique cabinet design of these fan coils meet stringent regulations for cabinet air leakage a requirement of 2% cabinet leakage rate when tested at 1.0 inches ofstatic pressure. The FB4C fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor ECM technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted, taupe metallic, galvanized steel casing and a factory-supplied power plug for ease of installation. The FB4C unit is shipped with a factory-installed Teflon-ring piston FB4CNF, 018-048, or a Puron refrigerant TXV FB4CNF060, FB4CNP, 018-060.

Standard Features:

• Multi-tap ECM, electronic commutating motor motors all sizes
• Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
• Five available speed tags to meet a wide range of applications
• Large, grooved tube, louvered fin coils
• Efficient, quiet, time-tested blower housings and diffusers
• Sturdy, drainable condensate pans
• Cabinet construction features innovations designed to prevent cabinet sweating
• Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
• Super-thick R-4.2 insulation with vapor barrier
• Pre-painted galvanized steel cabinet taupe metallic
• Cabinet design meets stringent regulations for 2% cabinet leakage rate when tested at 1.0 inches static pressure
• Installation-flexible, multipoise units
• Horizontal hanging provisions on cabinet
• No tools required to access filter
• Newly improved filter rack area filter door insulation added for improved air seal
• Factory-installed heater packages available on select models, 5- through 15kW)
• 3 through 30kW accessory heaters field installed
• Factory-supplied power plug
• Easy plug-in provisions for heater installation
• Entry options for high and low voltage wiring hook-up
• Leak-preventing sweat connections
• Puron refrigeration factory-installed Teflon-ring pistons on all FB4CNF, 018-048 coils
• Thermostatic expansion valve, TXV, on all FB4CNP coils and FB4CNF060
• Designed for manufactured housing applications
• Factory-installed heater packages available on select models
  
  

 

Click Here to View Recommended Product Accessories

Details

The Bryant FB4C Air Handler has the proven technology of Bryant fan coil units with Puron refrigerant as well as vertical and horizontal applications. The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate. Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all Bryant heat pumps and air conditioners. Units come with solid state fan controls, 1, 25mm thick insulation with R-value of 4.2, multi-speed motors, and fully-wet table coils. Units can accommodate factory and/or field-installed heaters from 3 to 30kW.It also should be noted that the unique cabinet design of these fan coils meet stringent regulations for cabinet air leakage a requirement of 2% cabinet leakage rate when tested at 1.0 inches ofstatic pressure. The FB4C fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor ECM technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted, taupe metallic, galvanized steel casing and a factory-supplied power plug for ease of installation. The FB4C unit is shipped with a factory-installed Teflon-ring piston FB4CNF, 018-048, or a Puron refrigerant TXV FB4CNF060, FB4CNP, 018-060.


Standard Features:



• Multi-tap ECM, electronic commutating motor motors all sizes
• Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
• Five available speed tags to meet a wide range of applications
• Large, grooved tube, louvered fin coils
• Efficient, quiet, time-tested blower housings and diffusers
• Sturdy, drainable condensate pans
• Cabinet construction features innovations designed to prevent cabinet sweating
• Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
• Super-thick R-4.2 insulation with vapor barrier
• Pre-painted galvanized steel cabinet taupe metallic
• Cabinet design meets stringent regulations for 2% cabinet leakage rate when tested at 1.0 inches static pressure
• Installation-flexible, multipoise units
• Horizontal hanging provisions on cabinet
• No tools required to access filter
• Newly improved filter rack area filter door insulation added for improved air seal
• Factory-installed heater packages available on select models, 5- through 15kW)
• 3 through 30kW accessory heaters field installed
• Factory-supplied power plug
• Easy plug-in provisions for heater installation
• Entry options for high and low voltage wiring hook-up
• Leak-preventing sweat connections
• Puron refrigeration factory-installed Teflon-ring pistons on all FB4CNF, 018-048 coils
• Thermostatic expansion valve, TXV, on all FB4CNP coils and FB4CNF060
• Designed for manufactured housing applications
• Factory-installed heater packages available on select models
  
  

 

• Model Number(s) FB4CNF042L00
• Brand Bryant
• Type N/A
• Category Air Handlers
• Ton 3.5 Ton
• SEER No
• Capacity N/A
• Heating Input Btu N/A
• Heating Output Btu N/A
• HSPF No
• Cooling Btu No
• Cooling Stage(s) N/A
• Compressor Stage N/A
• Afue N/A
• Heating Btu No
• Heating Stage(s) N/A
• Blower Application Multi-Position
• Furnace Configuration N/A
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) 15
• Hertz (Hz) 60
• Decibel Level (dB) N/A
• Blower Multi-Speed
• Maximum CFM 1,400
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 7/8
• Liquid Valve Size (Inches) 3/8
• Min. Operating Temp. (Degrees) No
• Outdoor Unit Height (Inches) No
• Outdoor Unit Width (Inches) No
• Outdoor Unit Depth (Inches) No
• Indoor Unit Height (Inches) No
• Indoor Unit Width (Inches) No
• Indoor Unit Depth (Inches) No
• Coil Dimensions (W x D x H)(Inches) No
• Height (Inches) 49 5/8
• Width (Inches) 21 1/8
• Length (Inches) No
• Depth (Inches) 22 1/16
• Total Shipping Weight (lbs.) 122
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• Heat Exchanger Warranty (Years) N/A
• UPC # 646341705749

Have questions about this product? Ask us here:

• Name
• Email
• Enter Your Question
• Captcha
  Post Question