The Rheem RA14AZ Air Conditioner offers the solid technology and energy-saving performance you've come to expect from Rheem. It's also quiet, so you won't give your indoor home comfort a second thought. Our Classic Series includes features that help fight corrosion, reduce leaks and enhance the overall strength of your air conditioner so you can be confident in the way it performs. A smart, efficient design makes the Rheem Air Conditioner one of your best options for staying cool inside. Each new unit includes a generous list of features that work together to bring you quiet, efficient and reliable indoor comfort.
Standard Features:
Lighter Footprint & Less Environmental Impact from New 7mm Condenser Coil provided by a decrease in refrigerant requirements and an overall weight reduction
Efficient Cooling up to 14.3 SEER2/11.7 EER2
PlusOne Expanded Value Space: 3in- 4in- 5 in service valve space- provides a minimum working area of 27-square inches for easier access
PlusOne Triple Service Access: 15 in wide, industry leading corner service access- makes repairs easier and faster. The two fastener, removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly
System Matching Simplicity- matches to all tiers of gas furnaces
Modern cabinet aesthetics- High curb appeal with visually appealing design
Curved louver panels- provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
Scroll compressor - uses 70% fewer moving parts for higher efficiency and increased reliability
Diagnostic service window with two-fastener opening- provides access to the high and low pressure
External gauge port access- allows easy connection of “low-loss†gauge ports
QR code- provides technical information on demand for faster service calls
Fan motor harness with extra-long wires allows unit top to be removed without disconnecting fan wire
The Ruud by Rheem Endeavor Series Evaporator Coil is built to perform like a champion. Its all-aluminum construction makes it extra durable, allowing the coil to run better and last longer. Even the endplates are aluminum, so the unit looks as good as it runs. Every coil is factory-tested, checked for leaks and held to the highest industry standards. If it doesn't pass the test, it doesn't go in the box. We’re also proud that the coils robust design far exceeds normal operating pressures. Precise heat-control of the automated brazing oven during the brazing process means you get a quality braze joint every time. So, you can guarantee your customers one of the most durable, long-lasting products on the market today.
Standard Features:
Rheem® Indoor Furnace cased coils and replacement uncased coils are designed for use with Rheem outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Rheem outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,00 BTU/HR [17.6 kW]
Constructed of aluminum fins bonded to internally grooved aluminum tubing
Coils are tested at the factory with an extensive refrigerant leak check
Coils have copper sweat refrigerant connections
Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection
Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only)
Approved for system application with variety of Rheem outdoor units
Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material
Compatible with Germicidal Light System (UV resistant)
Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right
Unique drain pan design maximizes application flexibility and condensate removal.
N-Coil design maximizes performance and minimizes height required at installation
Coils are AHRI certified for system application with a variety of Rheem outdoor units
**IMPORTANT NOTE** SINGLE EVAPORATOR COILS ARE SHIPPED VIA GROUND TRANSIT SERVICES. UPON UNPACKING YOUR EQUIPMENT, YOU MAY FIND THAT SOME OF THE COIL FINS ARE SLIGHTLY BENT. BENT FINS ON YOUR EVAPORATOR OR CONDENSER COIL ARE COMPLETELY NORMAL AND HAPPENS DURING THE MANUFACTURING AND ASSEMBLY PROCESS, NOT DURING TRANSIT. BENT FINS WILL NOT IMPEDE THE FUNCTIONALITY OF YOUR EQUIPMENT AND DOES NOT CONSTITUTE EQUIPMENT "DAMAGE". CLAIMS CANNOT BE FILED FOR BENT FINS. UNLESS THERE IS VISIBLE DAMAGE TO THE EXTERNAL PACKAGING AND/OR PANELS OF THE UNIT, THESE CLAIMS CANNOT BE ACKNOWLEDGED.
The Rheem R801T Gas Furnace was designed with industry-exclusive features for years of worry-free comfort. Its also quiet, so you can stay focused on what matters most. The Rheem Gas Furnace was developed using our 360°+1 design philosophy, which means every detail of the product is meticulously evaluated from every angle. We consider the work that goes into installing and servicing our products, as well as how we can deliver the very best homeowner experience. And then we take it a step further. That's 360 degrees +1. And that's why you can count on your gas furnace to bring you and your family years of comfort.
Standard Features:
PlusOne™ Diagnostics, 7-segment LED for quick and easy service
PlusOne™ Ignition System, direct spark ignition (DSI)
Low profile 34" cabinet design
Removable heat exchanger for improved serviceability
Aluminized steel construction provides maximum
corrosion resistance and thermal fatigue reliability
Hemmed cabinet and door edges
Blower shelf design ensures serviceability in all furnace orientations