The York YCG Condensers are the newest addition to our successful LX Series split system air conditioner lineup. Optimized for tax credit and utility rebate efficiency levels, these ENERGY STAR labeled outdoor units are specifically designed to be matched with York indoor coils, furnaces, and air handlers to provide a complete system solution.

Standard Features:

• High System Efficiency - Optimized system designs provide ENERGY STAR coil-only ratings in all tonnages. Targeted furnace and air handler matches meeting Federal Tax Credit efficiencies are available for almost all tonnages and markets.
• Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. The factory-installed filter drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system.
• Accessible Information - QR code on the unit provides quick access to technical documents and warranty information.
• Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Champagne colored powder coat paint further protects external panels.
• Quality Coils - The high-efficiency microchannel aluminum coil is manufactured using an improved material system providing reliable performance and smaller unit size.
• Rugged Coil Protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design.
• Protected Compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high and low-pressure switches. The liquid line filter-drier is factory installed to protect the compressor against moisture and debris.
• Reliable Operation - ECM ball-bearing fan motors provide superior performance in extreme temperatures.
• Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion.
• Top Discharge - Warm air is blown up, away from the structure, and any landscaping and allows compact location on multi-unit applications.
• Low Operating Sound Levels - Specific sound and vibration development tests provide a design sound performance of 74 dBA or lower. Swept-wing fan blades are featured on units 2.5-Tons and higher. Compatible accessories for further sound reduction are also available.
• Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing-out control box for full corner access, and removable fan guard allow easy access for unit maintenance.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.

 

The York AE Air Handler line offers the ultimate in application flexibility. This unit may be used for upflow, downflow, horizontal right, or horizontal left applications. All JCI Unitary Products air handlers and coils can use a TXV to provide our customers with the optimum performance and refrigerant control. Single piece air handlers are available with “Flex-coils” (without a factory installed metering device). For added flexibility, an R-22 or R-410A TXV or piston must be field installed to meet the requirement of the desired refrigerant. Some models available with factory installed TXV.

Standard Features:

• Rigid Case Construction interior endoskeleton for structural support, smooth side, and locks in insulation.
• Powder-painted - G30 galvanized steel case provide a coated edge that resists corrosion and rust creep.
• MaxAlloyTM Coil - Long life aluminum coils built to deliver lasting performance, efficiency and reliability.
• Quality Construction - Structural components are made of Aluminum or G90 galvanized steel to prevent corrosion.
• Improved Insulation Design - Single piece with no external screws to reduce thermal transmission paths to prevent sweating. Foil faced insulation for ease of cleaning.
• Thermostatic Expansion Valve - The accessory chatleff style TXV provides easy installation to convert the indoor coil to the required refrigerant that does not require brazing to replace or install. Some models are available with factory installed TXV.
• Case Depth - These models have 20.5” casing which provide ease of attic access and tight applications.
• Thermoset Drain Pan - Positive slope for drainage to reduce cause for potential mold or contaminants.
• Factory Sealed - Achieves 2% or less total airflow leakage rate at duct leakage test conditions in positive and negative pressure for system airflow verification.
• Enhanced Filter Rack - All models have integrated internal filter racks provided for use with 1” thick standard size filters.
• Electric Heat Kits - 6HK series of field installed electric heat kits are available for installation-friendly and easy service applications.
• Blowers - All models use direct-drive, standard ECM motors.

 

Click Here to View Recommended Product Accessories

Details

The York YCG Condensers are the newest addition to our successful LX Series split system air conditioner lineup. Optimized for tax credit and utility rebate efficiency levels, these ENERGY STAR labeled outdoor units are specifically designed to be matched with York indoor coils, furnaces, and air handlers to provide a complete system solution.


Standard Features:



• High System Efficiency - Optimized system designs provide ENERGY STAR coil-only ratings in all tonnages. Targeted furnace and air handler matches meeting Federal Tax Credit efficiencies are available for almost all tonnages and markets.
• Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. The factory-installed filter drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system.
• Accessible Information - QR code on the unit provides quick access to technical documents and warranty information.
• Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Champagne colored powder coat paint further protects external panels.
• Quality Coils - The high-efficiency microchannel aluminum coil is manufactured using an improved material system providing reliable performance and smaller unit size.
• Rugged Coil Protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design.
• Protected Compressor - Compressors are protected internally by a high-pressure relief valve and a temperature sensor, and externally by the system high and low-pressure switches. The liquid line filter-drier is factory installed to protect the compressor against moisture and debris.
• Reliable Operation - ECM ball-bearing fan motors provide superior performance in extreme temperatures.
• Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion.
• Top Discharge - Warm air is blown up, away from the structure, and any landscaping and allows compact location on multi-unit applications.
• Low Operating Sound Levels - Specific sound and vibration development tests provide a design sound performance of 74 dBA or lower. Swept-wing fan blades are featured on units 2.5-Tons and higher. Compatible accessories for further sound reduction are also available.
• Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing-out control box for full corner access, and removable fan guard allow easy access for unit maintenance.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.

 

The York AE Air Handler line offers the ultimate in application flexibility. This unit may be used for upflow, downflow, horizontal right, or horizontal left applications. All JCI Unitary Products air handlers and coils can use a TXV to provide our customers with the optimum performance and refrigerant control. Single piece air handlers are available with “Flex-coils” (without a factory installed metering device). For added flexibility, an R-22 or R-410A TXV or piston must be field installed to meet the requirement of the desired refrigerant. Some models available with factory installed TXV.


Standard Features:



• Rigid Case Construction interior endoskeleton for structural support, smooth side, and locks in insulation.
• Powder-painted - G30 galvanized steel case provide a coated edge that resists corrosion and rust creep.
• MaxAlloyTM Coil - Long life aluminum coils built to deliver lasting performance, efficiency and reliability.
• Quality Construction - Structural components are made of Aluminum or G90 galvanized steel to prevent corrosion.
• Improved Insulation Design - Single piece with no external screws to reduce thermal transmission paths to prevent sweating. Foil faced insulation for ease of cleaning.
• Thermostatic Expansion Valve - The accessory chatleff style TXV provides easy installation to convert the indoor coil to the required refrigerant that does not require brazing to replace or install. Some models are available with factory installed TXV.
• Case Depth - These models have 20.5” casing which provide ease of attic access and tight applications.
• Thermoset Drain Pan - Positive slope for drainage to reduce cause for potential mold or contaminants.
• Factory Sealed - Achieves 2% or less total airflow leakage rate at duct leakage test conditions in positive and negative pressure for system airflow verification.
• Enhanced Filter Rack - All models have integrated internal filter racks provided for use with 1” thick standard size filters.
• Electric Heat Kits - 6HK series of field installed electric heat kits are available for installation-friendly and easy service applications.
• Blowers - All models use direct-drive, standard ECM motors.

 

• Model Number(s) YCG42B21S - AE42CX21
• Brand York
• Type Air Conditioning
• Category No
• Ton 3.5 Ton
• SEER 17
• HSPF No
• Coil Dimensions (W x D x H)(Inches) No
• Cooling Btu No
• Heating Btu No
• Heating Input Btu No
• Heating Output Btu No
• Cooling Stage(s) 1
• Heating Stage(s) No
• Compressor Stage Single
• Blower Application Multi-Position
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) No
• Hertz (Hz) 60
• Decibel Level (dB) No
• Blower Multi-Speed
• Maximum CFM No
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 7/8
• Liquid Valve Size (Inches) 3/8
• Height (Inches) No
• Length (Inches) No
• Depth (Inches) No
• Width (Inches) No
• Total Shipping Weight (lbs.) No
• Outdoor Unit Height (Inches) 39 1/2
• Outdoor Unit Width (Inches) 38
• Outdoor Unit Depth (Inches) 34 1/4
• Indoor Unit Height (Inches) 51 1/2
• Indoor Unit Width (Inches) 21
• Indoor Unit Depth (Inches) 21 7/16
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• AHRI Certificate # No
• UPC # 703158714514

Have questions about this product? Ask us here:

• Name
• Email
• Enter Your Question
• Captcha
  Post Question