Toggle Nav
  • Order Online or Call
  • (888) 474 - 9966
  • Mon - Fri 9:00am - 3:00am EST - Se Habla Español
    Sat - Sun 9:00am - 6:00pm EST
My Cart
SHOPPING CART items 0 items

Split System Installation Kit

Model:INSTKT-1.5-2.5
$309.00

In Stock

QTY: - +
  • Use Coupon Code ACC10 for 10% Off!
  • Free Shipping
  • Low Price Guarantee
Required Options:
Split System Installation Kit is available to buy in increments of 1

Description

The INSTK Split System Installation Kit comes with the following: SS-1 - EL-3636-3 - CT34X50OD - CT38X50OD - 6RX048038 - FBTD - ISOPAD


The SAFE-T-SWITCH SS-1 Primary Float Switch detects down stream clogs in condensate drains and interrupts the thermostat circuit to shut off the unit before flooding occurs. Works with Safe-T-Gard Model SG-1 condensate overflow alarm. The Model SS-1 installs inline at any downward slope from vertical to horizontal. It can also be installed on auxiliary pan outlets utilizing the plug included with the kit. PVC Tee body accepts a 3/4 inch slip PVC stub or drain pipe with included bushing. Compact footprint fits well in sloped drains and tight spaces.


Installation Options Include:

  • Inline installation in primary condensate drains (vertical or horizontal)
  • Auxilliary (safety) pan outlet installation with included plug and plugged installation on alternate primary drain outlets


Standard Features:

  • Sealed, waterproof reed/magnet float switch
  • Potted electrical contacts for reliable performance in wet environments
  • Float resets automatically and after the drain is cleared
  • 6 ft. lead wires are pre-wired and sealed requiring one electrical connection during installation (usually within the air handler electrical cabinet)
  • UL Listed to comply with UL 508 and most applicable building codes
  • Tested and listed for use in a 24-volt circuit at 1.25 amps 6000 cycles by Underwriters Laboratories
  • All fittings needed for installation on 3/4 inch drains and threaded female pan outlets and a plug for installation on auxiliary drain pan outlets.
  • Switch/cap assembly that removes easily to facilitate cleaning or clearing of clogged lines.


Specifications:

  • 24 Volts A/C
  • 1.25 Amp GP Switching Current (Tested and Listed by UL at 6000 Cycles - Inductive Load)
  • Reed Component Device is Separately UL Recognized at 2.5 Amps Max. Carry Current.
  • Schedule 40 PVC Slip Fittings Accept 3/4 inch Stub or Drain Line.


Package Includes:

  • Pre-wired 6 ft. 18 Gauge Lead Wires
  • 3/4 inch Schedule 40 PVC Slip Plug
  • 3/4 inch Threaded Male x Slip Male Adapter
  • 3/4 inch x 1 inch Reducer Bushing



Installation Options Include:

  • Inline installation in primary condensate drains (vertical or horizontal)
  • Auxilliary (safety) pan outlet installation with included plug and plugged installation on alternate primary drain outlets.

Features:

  • Sealed, waterproof reed/magnet float switch
  • Potted electrical contacts for reliable performance in wet environments
  • Float resets automatically and after the drain is cleared
  • 6-Foot lead wires are prewired and sealed requiring one electrical connection during installation (usually within the air handler electrical cabinet)
  • UL Listed to comply with UL 508 and most applicable building codes
  • Tested and listed for use in a 24-volt circuit at 1.25 amps 6000 cycles by Underwriters Laboratories
  • All fittings needed for installation on drains and threaded female pan outlets and a plug for installation on auxiliary drain pan outlets.
  • Switch/cap assembly that removes easily to facilitate cleaning or clearing of clogged lines.


Specifications:

  • 24 Volts A/C
  • 1.25 Amp GP Switching Current (Tested and Listed by UL at 6000 Cycles - Inductive Load)
  • Reed Component Device is Separately UL Recognized at 2.5 Amps Max. Carry Current.
  • Schedule 40 PVC Slip Fittings Accept 3/4-inch Stub or Drain Line.


Package Includes:

  • Pre-wired 6-Foot 18 Gauge Lead Wires
  • 3/4-inch Schedule 40 PVC Slip Plug
  • 3/4-inch Threaded Male X Slip Male Adaptor
  • 3/4-inch X 1-inch Reducer Bushing.

 

The Copper Line Set Tubing is strong and corrosion-resistant which makes it the leading choice of modern contractors for plumbing, heating and cooling installations in all kinds of residential and commercial buildings. The combination of easy handling, forming and joining permits savings in installation time, material and overall costs. Long-term performance and reliability mean fewer call backs, and that makes copper the ideal cost-effective tubing material.


Standard Features:

  • Copper resists corrosion - Excellent resistance to corrosion and scaling assures long, trouble-free service with copper.
  • Copper is lightweight - Copper tube does not require the heavy thickness of ferrous or threaded pipe of the same diameter. This means copper costs less to transport, handles more easily and, when installed, takes less space.
  • Copper is flexible - Because copper tube can be readily bent and formed, it is frequently possible to eliminate elbows and joints. Smooth bends permit the tube to follow contours and corners of almost any angle. With soft-temper tube, particularly when used for renovation and modernization projects, much less wall and ceiling space is needed.
  • Copper is durable - Copper tube is manufactured to well-defined composition standards and marked with permanent identification so you know exactly what it is and who made it. Copper tube is accepted by virtually every plumbing code.
  • Copper is easy to join - Copper tube can be joined with capillary fittings. These fittings save material and make smooth, neat, strong, leak-proof joints. No extra thickness or weight is necessary to compensate for material removed by threading.
  • Copper is safe - Copper tube will not burn or support combustion and decompose to toxic gases. Therefore, it will not carry fire through floors, walls, or ceilings. Volatile organic compounds are not required for installation.


The Insulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled-water, and refrigeration lines. It also efficiently reduces heat flow for hot-water plumbing, liquid-heating and dual-temperature piping.

The recommended temperature usage range for Pipe Insulation is -70ºF to +220ºF (-57ºC to +105ºC). For use on cold pipes, Pipe Insulation thicknesses have been calculated to control condensation on the insulation outer surface, as shown in the table of thickness recommendations.

The closed-cell structure of Insulation effectively retards the flow of moisture vapor, and is considered a low-transmittance vapor retarder. Insulation normally requires no supplemental vapor-retarder protection.

Additional vapor-retarder protection may be necessary for this insulation when installed on very-low-temperature piping or where exposed to continually high humidity conditions.

Please check your piping and insulation requirements on the chart of the air conditioners purchased. The I.D. dimensions should be identical to the suction line size. Insulation is required on any copper pipe that will be exposed after the expansion devices, therefore please measure the amount of exposed pipe and consider that every insulation piece has 6 feet in length.

 

The FBTD Condenser and Heat Pump Tie Downs

  • Pack of (4)
  • Used to anchor the condenser to your slab
  • Adds protection against wind and theft
  • Prevents movement of unit while in operation

 

The Polyolefin Condenser Pads provide a perfectly level surface of operation which will insure optimum oil flow back to the compressor allowing efficient operation and an extended life of your system.



  • Used for Air Conditioning Condensing Units and Heat Pumps
  • Made of Polyolefin
  • Virtually unbreakable
  • Lightweight
  • 36" x 36" Size
  • One-piece construction

Product Specification

Model Number(s) INSTKT-1.5-2.5
Brand The AC Outlet
UPC # 646341700386

Related Documents and Technical Specification

Customer Reviews

For More Reviews

Split System Installation Kit

Model:INSTKT-1.5-2.5

$309

QTY: