Toggle Nav
My Cart
SHOPPING CART items 0 items

2.5 Ton 13 Seer Goodman 60,000 Btu 80% Afue Dual Fuel System

Model:GSZ130301 - CAPF3636B6 - GMH80604BN - TX3N4
Call for Details

Discontinued

  • Free Shipping
Required Options:

Accessories

30 x 30 Concrete Condenser Pad
Model: HT3030-4

$239.00

30 x 30 Polyolefin Condenser Pad
Model: EL3030-3

$79.00

1.5 Ton - 2.5 Ton Copper Line Set (3/8 x 3/4 x 50 ft)
Model: CT38X50OD-CT34X50OD-6RX048068

$399.00

Rx11 Copper Line Set Flush Starter Kit
Model: 4300-08

$229.00

Copper Line Sight Glass Moisture Indicator (3/8 Inch)
Model: PPDRISG3S

$39.99

Non-Fusible Safety Disconnect Switch
Model: 83335

$34.95

1.5 Ton - 2.5 Ton Copper Line Set (3/8 x 3/4 x 30 ft)
Model: LS38343830

$289.00

Condenser Tie Downs
Model: FBTD

$17.99

Anti-Vibration Rubber Pads
Model: ISO-2

$14.99

Flexible Electric Supply Whip (1/2 in x 6 ft)
Model: EW-84136

$34.95

Flexible Electric Supply Whip (3/4 in x 6 ft)
Model: EW-84138

$46.95

Tie-Down Kit
Model: FBTD - AVP-2X2X75-4

$21.99

ProStat Non-Programmable Thermostat (1H/1C)
Model: PRS3110

$49.95

ProStat Non-Programmable Thermostat (2H/1C)
Model: PRS3210

$69.95

ProStat Universal Programmable Thermostat (1H/1C)
Model: PRS4110

$66.95

ProStat Universal Programmable Thermostat (2H/1C)
Model: PRS4210

$79.95

ProStat Premier Universal Programmable Smart WiFi Thermostat (3H/2C)
Model: PRS7325WF

$139.95

Description

The Goodman GSZ13 Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 13 SEER rating, the GSZ13 will help reduce energy consumption throughout the life of the system. This unit is backed by a 10-Year Parts Limited Warranty. Online registration required within 60 days of installation.


Standard Features:

  • R-410A environmentally friendly refrigerant
  • Energy-efficient scroll compressor
  • Low-pressure switch
  • 850 RPM condenser fan motor
  • Liquid refrigerant return protection
  • Factory-installed, bi-flow liquid line filter dryer
  • Service valves with sweat connections and easy-access gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Reliable time-initiated, temperature-terminated defrost control
  • Contactor with lug connection
  • ARI Certified; ETL Listed


Cabinet Features:

  • Unique Goodman sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Service ports and controls are accessible while unit is operating
  • When properly anchored, meets the 2001 Florida Building Code requirements for hurricane-type winds
  • 10 Year Limited parts Warranty


NOTE TO CUSTOMER: To ALL interested parties, the sale of this 13 Seer Rated product is limited to the following states [AK, CO, CT, ID, IL, IN, IA, KS, ME, MA, MI, MN, MO, MT, NE, NH, NJ, NY, ND, OH, OR, PA, RI, SD, UT, VT, WA, WV, WI, WY, as well as the U.S. Territories]. If you are located in [AZ, CA, NV, NM, AL, AR, DE, FL, GA, HI, KY, LA, MD, MS, NC, OK, SC, TN, TX, VA and the District of Columbia] then you must purchase a minimum of 14 Seer Rated product in order to conform to the new EPA Regulations. Please contact us at 888.474.9966 for further information.

 

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.


Standard Features:

  • Suitable for use with R-410A and R-22 refrigerants
  • Rust-proof, thermoplastic drain pans feature a low water-retention design
  • Check flowrater expansion device for heat pump or cooling-only applications
  • Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
  • Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil


Cabinet Features:

  • Foil-face insulation
  • Galvanized leather-grain finish
  • Architectural Gray paint finish on CAPF and CHPF cased coils
  • Split-seam front for easy access

 

The Goodman GMH8/GDH8 Gas Furnaces feature a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, insulated steel cabinet and durable baked enamel finish, these furnaces can be installed in a variety of locations.


Standard Features:

  • Dual-diameter tubular heat exchanger
  • Two-stage gas valve Dual$aver technology that allows installer to activate the two-stage valve with the flip of a dip-switch
  • 110V Silicon Nitride igniter designed for long igniter life
  • Furnace control board with self-diagnostics, color-coded low-voltage terminals, and provisions for electronic air cleaner and 24-volt humidifiers
  • Control board stores the last five diagnostic codes in memory; simple push-button activation outputs the fault history to a flashing red LED
  • Low constant fan allows homeowner to activate the low heat speed to efficiently circulate air throughout the home.
  • Self-adjusting feature automatically adjusts furnace to high- or low-stage operation based on outside temperature without an outdoor temperature sensor


Cabinet Features:

  • Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
  • Foil-faced insulation lines the heat exchanger
  • Factory-sealed to achieve 2% or less leakage rate at 1.0 water gauge external duct static pressure
  • Designed for multi-position installation: upflow, horizontal left or right
  • Removable bottom for side or bottom return applications
  • Convenient left or right connection for gas/electric service
  • Coil and furnace fit flush for most installations

 

Product Specification

No Returns No
Product On Sale No
UPC 640852912344
Free Shipping No
GroupKit Heat Pump / Condenser Kit (1.5 - 2.5 Ton)
Brand Goodman
Ton 2.5 Ton
Seer 13 Seer
Afue 80% Afue
Btu 80,000 - 99,000 Btu
Category Split Systems
Model Number(s) GMH80604BN - TX3N4
Brand Goodman
Type Dual Fuel
Ton 2.5 Ton
SEER 13
Cooling Btu 28,600
Heating Btu 26,400
Heating Input Btu 60,000
Heating Output Btu 48,000
Cooling Stage(s) 1
Compressor Stage Single
Furnace Configuration Multi-Position
Blower Multi-Speed
Electrical Phase(s) 1
Hertz (Hz) 60
Decibel Level (dB) 72
Maximum CFM 1,600
Refrigerant Type R-410A
Suction Valve Size (Inches) 3/4
Liquid Valve Size (Inches) 3/8
Total Shipping Weight (lbs.) 261
Outdoor Unit Height (Inches) 32 1/4
Outdoor Unit Width (Inches) 26
Outdoor Unit Depth (Inches) 26
Coil Dimensions 22 x 17 1/2 x 21
Indoor Unit Height (Inches) 33 3/8
Indoor Unit Width (Inches) 17 1/2
Indoor Unit Depth (Inches) 28
Parts Warranty (Years) 10
Compressor Warranty (Years) 10
Heat Exchanger Warranty (Years) Lifetime
UPC # 640852912344

Product Reviews

For More Reviews

Shop By Category

2.5 Ton 13 Seer Goodman 60,000 Btu 80% Afue Dual Fuel System

Model:GSZ130301 - CAPF3636B6 - GMH80604BN - TX3N4

$0

QTY: