The Goodman GSX16 Air Conditioner is the latest high efficiency 16 SEER Air Conditioner from Goodman and provides a mix of performance, efficiency and value unmatched in the industry. The GSX16 uses the environmentally friendly refrigerant R-410A and features the unique Goodman sound control top design for quiet operation. The coil is made of rifled refrigeration-grade copper tubing and corrugated aluminum fins in a design that maximizes surface area. In addition, the unit has an attractive louvered metal guard that protects the coil from damage plus a powder-paint finish that provides premium durability and improved UV protection.
Standard Features:
R-410A environmentally friendly refrigerant
Factory-installed liquid line filter dryer
850-RPM condenser fan motor
High-efficiency scroll compressor
Copper tube/aluminum fin coil
Service valves with sweat connections and gauge ports
Contactor with lug connection
Ground lug connection
ARI Certified; ETL Listed
Cabinet Features:
Unique Goodman sound control top design
Steel louver coil guard
Heavy-gauge galvanized-steel cabinet
Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds
10 Year Limited Parts Warranty
The Goodman AVPTC Air Handler includes a variable-speed ECM motor to help eliminate the cold blast of air upon heating start-up. The constant low speed fan run option helps to maintain temperature throughout the household. State of the art variable speed technology.
Standard Features:
Compatible with the ComfortNet Communicating System family of products
Maximum four low-voltage wires required for operation in communicating mode
Auto configuration of the airflow and tonnage in communicating mode
In non-communicating mode, up to 12 field-selectable airflow settings can be adjusted to optimize the systems CFM for each individual mode of operation
R-410A refrigerant-compatible
Factory-installed thermal expansion valves for cooling and heat pump applications
Variable-speed ECM blower motor
All-aluminum evaporator coil
Provides constant CFM over a wide range of static pressure conditions independent of duct system
Provides adjustable low CFM for efficient fan-only operation
CFM indicator with front-panel sight glass
Improved humidity control and comfort
Compatible with variable-capacity heat pumps and cooling applications
Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections
AHRI Certified; ETL Listed
Cabinet Features:
Fully insulated, painted steel cabinet with attractive Architectural Gray finish
Low-voltage cabinet connections; control circuit is arranged to permit staging
Power supply on top; low-voltage entry on top or side
Cabinet air leakage less than 2.0% at 1.0 inch H2Owhen tested in accordance with ASHRAE standard 193
Cabinet air leakage less than 1.4% at 0.5 inch H2Owhen tested in accordance with ASHRAE standard 193
Foil-faced insulation is glued in place and covers the entire blower case to reduce operating sound and cabinet condensation
The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.
Standard Features:
Suitable for use with R-410A and R-22 refrigerants
Rust-proof, thermoplastic drain pans feature a low water-retention design
Check flowrater expansion device for heat pump or cooling-only applications
Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil
Cabinet Features:
Foil-face insulation
Galvanized leather-grain finish
Architectural Gray paint finish on CAPF and CHPF cased coils
Split-seam front for easy access
The Goodman GMH8/GDH8 Gas Furnaces feature a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, insulated steel cabinet and durable baked enamel finish, these furnaces can be installed in a variety of locations.
Standard Features:
Dual-diameter tubular heat exchanger
Two-stage gas valve Dual$aver technology that allows installer to activate the two-stage valve with the flip of a dip-switch
110V Silicon Nitride igniter designed for long igniter life
Furnace control board with self-diagnostics, color-coded low-voltage terminals, and provisions for electronic air cleaner and 24-volt humidifiers
Control board stores the last five diagnostic codes in memory; simple push-button activation outputs the fault history to a flashing red LED
Low constant fan allows homeowner to activate the low heat speed to efficiently circulate air throughout the home.
Self-adjusting feature automatically adjusts furnace to high- or low-stage operation based on outside temperature without an outdoor temperature sensor
Cabinet Features:
Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
Foil-faced insulation lines the heat exchanger
Factory-sealed to achieve 2% or less leakage rate at 1.0 water gauge external duct static pressure
Designed for multi-position installation: upflow, horizontal left or right
Removable bottom for side or bottom return applications
Convenient left or right connection for gas/electric service