1.5 Ton 15 Seer Direct Comfort Heat Pump System (5Kw)
1.5 Ton 15 Seer Direct Comfort Heat Pump System (5Kw)
Model: DC-GSZ140181 - DC-AWUF310516 - TX2N4
Couldn't load pickup availability
110% Price Match Guarantee
The Direct Comfort GSZ14 Heat Pump will provide you with reliable cooling and heating at money-saving energy efficiency levels as compared to lower SEER heat pump units. Your Direct Comfort air conditioner starts with an energy-efficient compressor, which operates in tandem with our high-efficiency coil. The coil is made of rifled refrigeration-grade copper tubing and corrugated aluminum fins in a design that maximizes surface area. These high-quality components together cool your home.
Standard Features:
- R-410A chlorine-free refrigerant
- High-efficiency scroll compressor
- SmartShift technology to ensure quiet reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Copper tube/enhanced aluminum fin coil
- Fully charged for 15 ft of tubing length
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
Cabinet Features:
- Direct Comfort sound control top design
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Top and side maintenance access
- Service ports and controls are accessible while unit is operating
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds
The Direct Comfort AWUF Air Handler (front-return) is designed to be vertically wall or stud mounted. This unit features a check flowrater and direct drive, multi-speed motor. The AWUF is housed in a fully insulated, galvanized-steel cabinet.
Standard Features:
- Suitable for use with refrigerants R-410A (16 models only) and R-22 (16 & 1 models)
- Check flowrater for cooling and heat pump applications
- Direct-drive, multi-speed motor
- Sequence-controlled, rust-resistant nickel chromium heating elements of 5, 8 and 10 kW
- ARI Certified; ETL Listed
- Thermoplastic drain pan with bottom primary/secondary drain connection
- Built-in filter rack (filter included)
- Factory-installed pull-type disconnect
- Large Chassis (2 and 3 Ton Units); Front Return Only
- Small Chassis (1 and 2 Ton Units); Front or Bottom Return
- Wall-hanging bracket provided
| Model Number (s) | DC-GSZ140181 - DC-AWUF31051 - TX2N4 |
| Brand | Direct Comfort |
| Type | Heat Pump |
| Ton | 1.5 Ton |
| SEER | 15 |
| Cooling Btu | 17,600 |
| Cooling Stage(s) | 1 |
| Compressor Stage | Single |
| Electrical Phase(s) | 1-Phase |
| Decibel Level (dB) | 72 |
| Refrigerant Type | R-410A |
| Suction Valve Size (Inches) | 3/4 |
| Liquid Valve Size (Inches) | 3/8 |
| Outdoor Unit Height (Inches) | 34 1/2 |
| Outdoor Unit Width (Inches) | 29 |
| Outdoor Unit Depth (Inches) | 29 |
| Parts Warranty (Years) | 10 |
| Compressor Warranty (Years) | 10 |
| AHRI Certificate # | 7994960 |
| UPC # | 646341725600 |
| Heating Btu | 17,000 |
| Amp(s) | 20 |
| Blower | Multi-Speed |
| Maximum CFM | 1,090 |
| Heating Stage(s) | 1 |
| Indoor Unit Depth (Inches) | 21 |
| Indoor Unit Width (Inches) | 24 |
| Indoor Unit Height (Inches) | 36 |
| HSPF | 8.2 |
| Outdoor Unit Depth (Inches) | 29 |
| Parts Warranty (Years) | 10 |
| Compressor Warranty (Years) | 10 |
| AHRI Certificate # | 7994960 |
| UPC # | 646341725600 |
| Heating Btu | 17,000 |
| Amp(s) | 20 |
| Blower | Multi-Speed |
| Maximum CFM | 1,090 |
| Heating Stage(s) | 1 |
| Indoor Unit Depth (Inches) | 21 |
| Indoor Unit Width (Inches) | 24 |
| Indoor Unit Height (Inches) | 36 |
| HSPF | 8.2 |
