The York CZF Air Conditioner unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions.

Standard Features:

• Superior Coil Protection - A decorative, stamped metal coil guard completely protects coil from debris and other large damaging material.
• Isolated Compressor Compartment - A molded composite bulkhead isolates the compressor from the rest of the unit, reducing sound and vibration.
• Protected Compressors - Each compressor is protected against abnormal pressures by an internal pressure relief valve and factory installed high and low pressure controls. Additional protection against moisture and debris is provided by factory installed liquid line filter driers.
• Environmentally Friendly Refrigerant - Next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish - Automotive quality finish provides the ultimate protection from harmful U.V. rays and rust creep, ensuring long-lasting, high-quality appearance. A powder paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33 greater durability than conventional powder-coat finishes.
• Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment and angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier - A factory installed, solid core liquid line filter drier filters harmful debris and moisture from the system.
• Easy Service Access - A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base - Strong and durable composite base pan resists rust and corrosion while it helps reduce vibrations and noise.
• QuietDrive System - Features combination of swept-wing fan, composite base pan, isolated compressor compartment, and single-stage compressor to reduce overall sound to a mere whisper.
• Low RPM fan motor - Helps to reduce airflow noise.
• Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real-time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat.
• Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ANSI/AHRI Standard 210/240.

The York AHE Air Handler line offers the ultimate in comfort, sound and application flexibility. The air handler is shipped ready to be installed in upflow, horizontal left or right position, with minor adjustments. No special kits are required to install this deluxe product.

All JCI Unitary Products air handlers and coils use a TXV to provide our customers with the optimum performance and refrigerant control. Air handlers are shipped with "Flex-coils" without a factory installed metering device. For added flexibility, an R-22 or R-410A TXV or orifice can be field installed to meet your refrigerant choice.

Standard Features:

• Thermal Expansion Valve - Provides the ultimate refrigerant control required for today's high efficient product. The UPG bolt-on TXV provides easy installation to convert the air handler to the required refrigerant, which is a true bolt-on design that does not require brazing to replace or install.
• Insulated Cabinet - All air handler cabinets are thermally insulated with 3/4"; foil faced insulation to prevent sweating.
• Factory Sealed - Achieves 2 or less total airflow leakage rate at duct blaster field test conditions for system airflow verification.
• Durable Finish Inside and Out - Air handler casings are made of pre-painted galvanized steel which provides a better paint to steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G60 galvanized or prepainted G30 galvanized.
• Filters - All models have internal filter racks provided for use with 1"; thick standard size filters.
• Electric Heat Kits - New 6HK series of field installed electric heat kits are available for installation friendly and easy service applications. These 6HK kits are unique to these new models.
• High-Efficiency Blowers - All models use high-efficiency brushless DC motors to provide cooling SEER rating enhancement.

Details

The York CZF Air Conditioner unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions.


Standard Features:



• Superior Coil Protection - A decorative, stamped metal coil guard completely protects coil from debris and other large damaging material.
• Isolated Compressor Compartment - A molded composite bulkhead isolates the compressor from the rest of the unit, reducing sound and vibration.
• Protected Compressors - Each compressor is protected against abnormal pressures by an internal pressure relief valve and factory installed high and low pressure controls. Additional protection against moisture and debris is provided by factory installed liquid line filter driers.
• Environmentally Friendly Refrigerant - Next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish - Automotive quality finish provides the ultimate protection from harmful U.V. rays and rust creep, ensuring long-lasting, high-quality appearance. A powder paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33 greater durability than conventional powder-coat finishes.
• Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment and angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier - A factory installed, solid core liquid line filter drier filters harmful debris and moisture from the system.
• Easy Service Access - A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base - Strong and durable composite base pan resists rust and corrosion while it helps reduce vibrations and noise.
• QuietDrive System - Features combination of swept-wing fan, composite base pan, isolated compressor compartment, and single-stage compressor to reduce overall sound to a mere whisper.
• Low RPM fan motor - Helps to reduce airflow noise.
• Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real-time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat.
• Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ANSI/AHRI Standard 210/240.

 

The York AHE Air Handler line offers the ultimate in comfort, sound and application flexibility. The air handler is shipped ready to be installed in upflow, horizontal left or right position, with minor adjustments. No special kits are required to install this deluxe product.


All JCI Unitary Products air handlers and coils use a TXV to provide our customers with the optimum performance and refrigerant control. Air handlers are shipped with "Flex-coils" without a factory installed metering device. For added flexibility, an R-22 or R-410A TXV or orifice can be field installed to meet your refrigerant choice.


Standard Features:



• Thermal Expansion Valve - Provides the ultimate refrigerant control required for today's high efficient product. The UPG bolt-on TXV provides easy installation to convert the air handler to the required refrigerant, which is a true bolt-on design that does not require brazing to replace or install.
• Insulated Cabinet - All air handler cabinets are thermally insulated with 3/4"; foil faced insulation to prevent sweating.
• Factory Sealed - Achieves 2 or less total airflow leakage rate at duct blaster field test conditions for system airflow verification.
• Durable Finish Inside and Out - Air handler casings are made of pre-painted galvanized steel which provides a better paint to steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G60 galvanized or prepainted G30 galvanized.
• Filters - All models have internal filter racks provided for use with 1"; thick standard size filters.
• Electric Heat Kits - New 6HK series of field installed electric heat kits are available for installation friendly and easy service applications. These 6HK kits are unique to these new models.
• High-Efficiency Blowers - All models use high-efficiency brushless DC motors to provide cooling SEER rating enhancement.

 

• Model Number(s) AHE48D3XH21
• Brand York
• Type Air Conditioning
• Category N/A
• Ton 4.0 Ton
• SEER 15
• HSPF No
• Coil Dimensions (W x D x H)(Inches) No
• Cooling Btu 48,000
• Heating Btu No
• Heating Input Btu N/A
• Heating Output Btu N/A
• Cooling Stage(s) 1
• Heating Stage(s) N/A
• Compressor Stage Single
• Blower Application Multi-Position
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) No
• Hertz (Hz) 60
• Decibel Level (dB) 51
• Blower Multi-Speed
• Maximum CFM 1,600
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 7/8
• Liquid Valve Size (Inches) 3/8
• Height (Inches) No
• Length (Inches) No
• Depth (Inches) No
• Width (Inches) N/A
• Total Shipping Weight (lbs.) 396
• Outdoor Unit Height (Inches) 42
• Outdoor Unit Width (Inches) 39 1/2
• Outdoor Unit Depth (Inches) 34
• Indoor Unit Height (Inches) 24 1/2
• Indoor Unit Width (Inches) 57
• Indoor Unit Depth (Inches) 21 1/2
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• AHRI Certificate # No
• UPC #

Have questions about this product? Ask us here: