The Amana ASZC18 Heat Pump uses the R-410A refrigerant and is part of our new ComfortNet family of communicating units. In addition, the ASZC18 features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. This unit contains the two-stage, high-efficiency Copeland® scroll compressor, which provides improved temperature and humidity control for the consumer who desires superb comfort and quiet operation.

Standard Features:

• R-410A chlorine-free refrigerant
• Two-Stage Copeland UltraTech scroll compressor
• High-density foam compressor sound blanket
• Copeland ComfortAlert diagnostics
• ComfortNet 4-wire communication system
• High and low pressure switches
• Fully charged for 15’ of tubing length
• Factory-installed filter dryer
• Outdoor air temperature sensor
• Two-speed, quiet condenser fan motor
• Copper tube/enhanced aluminum fin coil
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed

Cabinet Features:

• Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder paint finish
• Rust-resistant coated screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.

Standard Features:

• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil

Cabinet Features:

• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access
• 17-1/2 inches, 21 inches, and 24-1/2 inches CHPF coils have one 3-1/2 inches adapter plate
• 17-1/2 inches, 21 inches, and 24-1/2 inches CAPF coils have two 1-3/4 inches adapter plates

The Goodman MBVC Modular Blower is tailor-made for exceptional energy efficiency. This blower is designed with quality components and assembled with excellent craftsmanship.

Standard Features:

• Compatible with the ComfortNet Communication System family of products
• Variable-speed ECM blower motor
• Auto configuration of the airflow and tonnage in communicating mode
• CFM indicator
• Maximum four low-voltage wires required for operation in communicating mode
• Built-in dehumidify feature
• Diagnostic indicator lights
• Storage of six prior fault codes
• Programmable heat strip settings
• Color-coded terminal strip for noncommunicating set-up
• Cooling and heat pump applications
• AHRI Certified
• ETL Listed

Cabinet Features:

• Painted, galvanized steel cabinet
• Blower section usable as an electric furnace
• Foil-faced insulation is glued in place and covers the entire blower case, reducing sound and cabinet condensation
• Bottom flanges formed inward for additional strength, and to provide mounting surface for cased-coil section

Details

The Amana ASZC18 Heat Pump uses the R-410A refrigerant and is part of our new ComfortNet family of communicating units. In addition, the ASZC18 features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. This unit contains the two-stage, high-efficiency Copeland® scroll compressor, which provides improved temperature and humidity control for the consumer who desires superb comfort and quiet operation.


Standard Features:



• R-410A chlorine-free refrigerant
• Two-Stage Copeland UltraTech scroll compressor
• High-density foam compressor sound blanket
• Copeland ComfortAlert diagnostics
• ComfortNet 4-wire communication system
• High and low pressure switches
• Fully charged for 15’ of tubing length
• Factory-installed filter dryer
• Outdoor air temperature sensor
• Two-speed, quiet condenser fan motor
• Copper tube/enhanced aluminum fin coil
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed


Cabinet Features:



• Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder paint finish
• Rust-resistant coated screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

 

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.


Standard Features:



• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil


Cabinet Features:



• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access
• 17-1/2 inches, 21 inches, and 24-1/2 inches CHPF coils have one 3-1/2 inches adapter plate
• 17-1/2 inches, 21 inches, and 24-1/2 inches CAPF coils have two 1-3/4 inches adapter plates

 

The Goodman MBVC Modular Blower is tailor-made for exceptional energy efficiency. This blower is designed with quality components and assembled with excellent craftsmanship.


Standard Features:



• Compatible with the ComfortNet Communication System family of products
• Variable-speed ECM blower motor
• Auto configuration of the airflow and tonnage in communicating mode
• CFM indicator
• Maximum four low-voltage wires required for operation in communicating mode
• Built-in dehumidify feature
• Diagnostic indicator lights
• Storage of six prior fault codes
• Programmable heat strip settings
• Color-coded terminal strip for noncommunicating set-up
• Cooling and heat pump applications
• AHRI Certified
• ETL Listed


Cabinet Features:



• Painted, galvanized steel cabinet
• Blower section usable as an electric furnace
• Foil-faced insulation is glued in place and covers the entire blower case, reducing sound and cabinet condensation
• Bottom flanges formed inward for additional strength, and to provide mounting surface for cased-coil section

 

• Model Number(s) MBVC2000AA-1 - TX3N4
• Brand Amana
• Type Heat Pump
• Category N/A
• Ton 3.0 Ton
• SEER 18
• HSPF 9.50
• Coil Dimensions (W x D x H)(Inches) 30 x 21 x 21
• Cooling Btu 35,000
• Heating Btu No
• Heating Input Btu No
• Heating Output Btu No
• Cooling Stage(s) 2
• Heating Stage(s) N/A
• Compressor Stage Dual
• Blower Application Multi-Position
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) No
• Hertz (Hz) 60
• Decibel Level (dB) 51
• Blower Variable Speed
• Maximum CFM 2,000
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 7/8
• Liquid Valve Size (Inches) 3/8
• Height (Inches) No
• Length (Inches) No
• Depth (Inches) No
• Width (Inches) N/A
• Total Shipping Weight (lbs.) 354
• Outdoor Unit Height (Inches) 35 1/2
• Outdoor Unit Width (Inches) 38 1/4
• Outdoor Unit Depth (Inches) 35 1/2
• Indoor Unit Height (Inches) 24 1/2
• Indoor Unit Width (Inches) 30
• Indoor Unit Depth (Inches) 21
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• AHRI Certificate # No
• UPC #

Have questions about this product? Ask us here: