The Amana ASZ14 Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 14 SEER rating, the ASZ14 will reduce energy consumption throughout the life of the system compared to US federal minimum efficiency standards for 13 SEER products.

Standard Features:

• R-410A environmentally friendly refrigerant
• High-efficiency Copeland scroll compressor
• High-density foam compressor sound blanket
• Copeland ComfortAlert diagnostics
• High and low pressure switches
• Fully charged for 15™ of tubing length
• Factory installed bi-flow liquid line filter dryer
• Liquid refrigerant return protection
• Two-speed condenser fan motor
• Copper tube/enhanced aluminum fin coil
• Sweat connection service valves with easy access to gauge ports
• ARI Certified; ETL Listed

Cabinet Features:

• Unique Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder paint finish
• Rust-resistant screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

 

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.

Standard Features:

• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil

Cabinet Features:

• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access

 

The Goodman MBVC Modular Blower is tailor-made for exceptional energy efficiency. This blower is designed with quality components and assembled with excellent craftsmanship.

Standard Features:

• Compatible with the ComfortNet Communication System family of products
• Variable-speed ECM blower motor
• Auto configuration of the airflow and tonnage in communicating mode
• CFM indicator
• Maximum four low-voltage wires required for operation in communicating mode
• Built-in dehumidify feature
• Diagnostic indicator lights
• Storage of six prior fault codes
• Programmable heat strip settings
• Color-coded terminal strip for noncommunicating set-up
• Cooling and heat pump applications
• AHRI Certified
• ETL Listed

Cabinet Features:

• Painted, galvanized steel cabinet
• Blower section usable as an electric furnace
• Foil-faced insulation is glued in place and covers the entire blower case, reducing sound and cabinet condensation
• Bottom flanges formed inward for additional strength, and to provide mounting surface for cased-coil section

 

Click Here to View Recommended Product Accessories

Details

The Amana ASZ14 Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 14 SEER rating, the ASZ14 will reduce energy consumption throughout the life of the system compared to US federal minimum efficiency standards for 13 SEER products.


Standard Features:



• R-410A environmentally friendly refrigerant
• High-efficiency Copeland scroll compressor
• High-density foam compressor sound blanket
• Copeland ComfortAlert diagnostics
• High and low pressure switches
• Fully charged for 15™ of tubing length
• Factory installed bi-flow liquid line filter dryer
• Liquid refrigerant return protection
• Two-speed condenser fan motor
• Copper tube/enhanced aluminum fin coil
• Sweat connection service valves with easy access to gauge ports
• ARI Certified; ETL Listed


Cabinet Features:



• Unique Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder paint finish
• Rust-resistant screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

 

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.


Standard Features:



• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil


Cabinet Features:



• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access

 

The Goodman MBVC Modular Blower is tailor-made for exceptional energy efficiency. This blower is designed with quality components and assembled with excellent craftsmanship.


Standard Features:



• Compatible with the ComfortNet Communication System family of products
• Variable-speed ECM blower motor
• Auto configuration of the airflow and tonnage in communicating mode
• CFM indicator
• Maximum four low-voltage wires required for operation in communicating mode
• Built-in dehumidify feature
• Diagnostic indicator lights
• Storage of six prior fault codes
• Programmable heat strip settings
• Color-coded terminal strip for noncommunicating set-up
• Cooling and heat pump applications
• AHRI Certified
• ETL Listed


Cabinet Features:



• Painted, galvanized steel cabinet
• Blower section usable as an electric furnace
• Foil-faced insulation is glued in place and covers the entire blower case, reducing sound and cabinet condensation
• Bottom flanges formed inward for additional strength, and to provide mounting surface for cased-coil section

 

• Model Number(s) MBVC1200AA-1 - TX2N4
• Brand Amana
• Type Heat Pump
• Category N/A
• Ton 1.5 Ton
• SEER 15
• HSPF 8.20
• Coil Dimensions (W x D x H)(Inches) 24 x 17 1/2 x 21
• Cooling Btu 18,000
• Heating Btu No
• Heating Input Btu No
• Heating Output Btu No
• Cooling Stage(s) 1
• Heating Stage(s) N/A
• Compressor Stage Single
• Blower Application Multi-Position
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) No
• Hertz (Hz) 60
• Decibel Level (dB) 70
• Blower Variable Speed
• Maximum CFM 1,200
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 3/4
• Liquid Valve Size (Inches) 3/8
• Height (Inches) No
• Length (Inches) No
• Depth (Inches) No
• Width (Inches) N/A
• Total Shipping Weight (lbs.) 221
• Outdoor Unit Height (Inches) 29
• Outdoor Unit Width (Inches) 34 1/2
• Outdoor Unit Depth (Inches) 29
• Indoor Unit Height (Inches) 17 1/2
• Indoor Unit Width (Inches) 26
• Indoor Unit Depth (Inches) 21
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• AHRI Certificate # No
• UPC #

Have questions about this product? Ask us here:

• Name
• Email
• Enter Your Question
• Captcha
  Post Question