The Amana ASXC18 Air Conditioner uses the chlorine free R-410A refrigerant and is part of our new ComfortNet family of communicating units. In addition, the ASXC18 features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. The ASXC18 contains the two-stage, high-efficiency Copeland scroll compressor, which provides improved temperature and humidity control. This unit is designed for the consumer who desires superb comfort and quiet operation.

Standard Features:

• R-410A chlorine-free refrigerant
• Two-Stage Copeland UltraTech scroll compressor
• High-density foam compressor sound blanket
• ComfortNet Communications System compatible
• Expanded ComfortAlert diagnostics built in
• Set-up capable with 2 low-voltage wires to outdoor unit
• Diagnostic indicator lights and storage of 6 fault codes
• Color-coded terminal strip for non-communicating set-up
• High and low pressure switches
• Fully charged for 15 feet of tubing length
• Factory-installed filter dryer
• Coil and ambient temperature sensors
• Two-speed quiet condenser fan motor
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed

Cabinet Features:

• Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder-paint finish
• Rust-resistant coated screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

 

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.

Standard Features:

• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil

Cabinet Features:

• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access

 

The Amana AMVM96 Gas Furnace is one of the most efficient furnaces available today. Not only will this furnace provide your family with years of reliable warmth in even the harshest of winters, it will do so with up to 96 AFUE efficiency. The heart of your Amana furnace is its Million-Air stainless-steel tubular heat exchanger. Formed using dual-diameter pipe and wrinkle bend technologies, the Million-Air is built to last.

The heart of your Amana furnace is its Million-Air stainless-steel tubular heat exchanger. Formed using our dual-diameter pipe and wrinkle bend technologies, the Million-Air is built to last. One of these heat exchangers has endured over two million extreme-temperature laboratory test cycles and is still going strong. In tandem with a variable-speed blower motor, a modulating gas furnace typically runs at the lowest possible speed to precisely maintain a constant, steady temperature in your home. Amana's self calibrating modulating gas valve quietly delivers optimal heating performance to your home.

Standard Features:

• Heavy-duty Million-Air stainless-steel dual-diameter, tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Self-calibrating modulating gas valve operates on two-stage or single-stage thermostats
• ComfortNet Communicating Systems compatible
• Up to 96 AFUE
• Efficient and quiet variable-speed circulator motor gently ramps up or down according to heating or cooling demand
• Durable SureStart Silicon Nitride igniter
• Furnace control board with self-diagnostics, color-coded low-voltage terminals and provisions for electronic air cleaners and humidifiers
• Control board stores the last 6 diagnostic codes in memory; simple push-button activation outputs the fault history to a dual 7-segment display
• Low-speed constant fan speed allows homeowner to quietly circulate air throughout the home. This setting costs as little as a 100-watt light bulb to operate
• Dual-certified for sealed combustion direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Auto-Comfort and enhanced dehumidification modes provide energy savings and additional comfort during the cooling months
• All models comply with California NOx emissions standards

 

Cabinet Features:

• Fully insulated heavy-gauge steel cabinet with durable baked enamel finish
• Foil-faced insulation lines the heat exchanger section
• Designed for multi-position installation: upflow, horizontal left or right
• Easy-to-install top venting is standard; alternate flue/vent locations available
• Airtight solid bottom for side-return applications and easy-cut tabs for effortless removal in bottom air-inlet applications
• Convenient left or right connection for gas and electric service

 

Click Here to View Recommended Product Accessories

Details

The Amana ASXC18 Air Conditioner uses the chlorine free R-410A refrigerant and is part of our new ComfortNet family of communicating units. In addition, the ASXC18 features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. The ASXC18 contains the two-stage, high-efficiency Copeland scroll compressor, which provides improved temperature and humidity control. This unit is designed for the consumer who desires superb comfort and quiet operation.


Standard Features:



• R-410A chlorine-free refrigerant
• Two-Stage Copeland UltraTech scroll compressor
• High-density foam compressor sound blanket
• ComfortNet Communications System compatible
• Expanded ComfortAlert diagnostics built in
• Set-up capable with 2 low-voltage wires to outdoor unit
• Diagnostic indicator lights and storage of 6 fault codes
• Color-coded terminal strip for non-communicating set-up
• High and low pressure switches
• Fully charged for 15 feet of tubing length
• Factory-installed filter dryer
• Coil and ambient temperature sensors
• Two-speed quiet condenser fan motor
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed


Cabinet Features:



• Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder-paint finish
• Rust-resistant coated screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

 

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.


Standard Features:



• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil


Cabinet Features:



• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access

 

The Amana AMVM96 Gas Furnace is one of the most efficient furnaces available today. Not only will this furnace provide your family with years of reliable warmth in even the harshest of winters, it will do so with up to 96 AFUE efficiency. The heart of your Amana furnace is its Million-Air stainless-steel tubular heat exchanger. Formed using dual-diameter pipe and wrinkle bend technologies, the Million-Air is built to last.

The heart of your Amana furnace is its Million-Air stainless-steel tubular heat exchanger. Formed using our dual-diameter pipe and wrinkle bend technologies, the Million-Air is built to last. One of these heat exchangers has endured over two million extreme-temperature laboratory test cycles and is still going strong. In tandem with a variable-speed blower motor, a modulating gas furnace typically runs at the lowest possible speed to precisely maintain a constant, steady temperature in your home. Amana's self calibrating modulating gas valve quietly delivers optimal heating performance to your home.


Standard Features:



• Heavy-duty Million-Air stainless-steel dual-diameter, tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Self-calibrating modulating gas valve operates on two-stage or single-stage thermostats
• ComfortNet Communicating Systems compatible
• Up to 96 AFUE
• Efficient and quiet variable-speed circulator motor gently ramps up or down according to heating or cooling demand
• Durable SureStart Silicon Nitride igniter
• Furnace control board with self-diagnostics, color-coded low-voltage terminals and provisions for electronic air cleaners and humidifiers
• Control board stores the last 6 diagnostic codes in memory; simple push-button activation outputs the fault history to a dual 7-segment display
• Low-speed constant fan speed allows homeowner to quietly circulate air throughout the home. This setting costs as little as a 100-watt light bulb to operate
• Dual-certified for sealed combustion direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Auto-Comfort and enhanced dehumidification modes provide energy savings and additional comfort during the cooling months
• All models comply with California NOx emissions standards

 

Cabinet Features:



• Fully insulated heavy-gauge steel cabinet with durable baked enamel finish
• Foil-faced insulation lines the heat exchanger section
• Designed for multi-position installation: upflow, horizontal left or right
• Easy-to-install top venting is standard; alternate flue/vent locations available
• Airtight solid bottom for side-return applications and easy-cut tabs for effortless removal in bottom air-inlet applications
• Convenient left or right connection for gas and electric service

 

• Model Number(s) AMVM961155DX - TX5N4
• Brand Amana
• Type Gas Heat
• Category N/A
• Ton 5.0 Ton
• SEER 16
• Cooling Btu 60,000
• Heating Btu No
• Heating Input Btu 115,000
• Heating Output Btu 109,250
• Cooling Stage(s) 2
• Compressor Stage Dual
• Afue 96%
• Heating Stage(s) N/A
• Furnace Configuration Multi-Position
• Blower Multi-Speed
• Blower Application N/A
• Voltage 208/230V
• Electrical Phase(s) 1
• Amp(s) No
• Hertz (Hz) 60
• Decibel Level (dB) N/A
• Maximum CFM 2,000
• Refrigerant Type R-410A
• Suction Valve Size (Inches) 1 1/8
• Liquid Valve Size (Inches) 3/8
• Height (Inches) No
• Length (Inches) No
• Depth (Inches) No
• Width (Inches) N/A
• Total Shipping Weight (lbs.) 466
• Outdoor Unit Height (Inches) 38 1/4
• Outdoor Unit Width (Inches) 35 1/2
• Outdoor Unit Depth (Inches) 35 1/2
• Coil Dimensions (W x D x H)(Inches) 30 x 24 1/2 x 21
• Indoor Unit Height (Inches) 40
• Indoor Unit Width (Inches) 24 1/2
• Indoor Unit Depth (Inches) 28 3/4
• AHRI Certificate # No
• Parts Warranty (Years) 10
• Compressor Warranty (Years) 10
• Heat Exchanger Warranty (Years) Lifetime
• UPC #

Have questions about this product? Ask us here:

• Name
• Email
• Enter Your Question
• Captcha
  Post Question