The Amana ASXC18 Air Conditioner uses the chlorine free R-410A refrigerant and is part of our new ComfortNet family of communicating units. In addition, the ASXC18 features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. The ASXC18 contains the two-stage, high-efficiency Copeland scroll compressor, which provides improved temperature and humidity control. This unit is designed for the consumer who desires superb comfort and quiet operation.

Standard Features:

• R-410A chlorine-free refrigerant
• Two-Stage Copeland UltraTech scroll compressor
• High-density foam compressor sound blanket
• ComfortNet Communications System compatible
• Expanded ComfortAlert diagnostics built in
• Set-up capable with 2 low-voltage wires to outdoor unit
• Diagnostic indicator lights and storage of 6 fault codes
• Color-coded terminal strip for non-communicating set-up
• High and low pressure switches
• Fully charged for 15 feet of tubing length
• Factory-installed filter dryer
• Coil and ambient temperature sensors
• Two-speed quiet condenser fan motor
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed

Cabinet Features:

• Amana sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder-paint finish
• Rust-resistant coated screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)

The Goodman CAPF, CAUF, CHPF, CAPT and CSCF Evaporator Coils are designed for use with Goodman Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.

Standard Features:

• Suitable for use with R-410A and R-22 refrigerants
• Rust-proof, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
• Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil

Cabinet Features:

• Foil-face insulation
• Galvanized leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access

The Amana AMVC95/ACVC9 Gas Furnaces provide exceptional indoor comfort and quiet operation. With their two-stage gas valves and variable-speed circulator blowers, these furnaces provide comfort all season long.

Standard Features:

• Patented MillionAir stainless-steel, dual diameter tubular heat exchanger with Lifetime
• Limited Unit Replacement Warranty* for as long as the original registered homeowner owns their home
• Two-stage gas valve operates on two-stage or single-stage thermostats
• ComfortNet Communications System compatible
• Efficient and quiet variable-speed circulator motor gently ramps up or down according to heating or cooling demand
• SureStart Silicon Nitride igniter designed for long igniter life
• Furnace control board with self-diagnostics, color-coded low-voltage terminals, and provisions for electronic air cleaner and 120-volt or 24-volt humidifiers
• Low constant fan allows homeowner to activate very low speed to efficiently circulate air throughout the home. This setting costs as little as a 100-watt light bulb to operate.
• Dual-certified for sealed combustion direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Easy-to-install top venting is standard; alternate flue/vent locations available
• Quiet, two-speed induced draft blower
• All models comply with California NOx emissions standards

Cabinet Features:

<

• Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
• Designed for multi-position installation: AMVC95: upflow, horizontal left or right, ACVC9: downflow, horizontal left or right
• Airtight solid bottom for side return applications & easy-cut tabs for effortless removal in bottom air inlet applications
• Convenient left or right connection for gas/electric service
• Coil and furnace fit flush for most installations