The Aspen AAW Series Air Handler (front-return) is designed to be vertically wall or stud mounted. This unit features a check flow rater, direct drive, multi-speed motor. The AAW is housed in a fully insulated, galvanized-steel cabinet.
Application Versatility
Front or bottom return air position. Offset hanging brackets attach to unit and wall to allow hanging inside closet. Can be AHRI matched with most brands of air conditioners or heat pumps. ETL listed for use with either R22 or R410a when a proper metering device is used.
Low-Leakage Cabinet
Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193. Unit must be installed according to Aspen installation instructions. Sturdy, fully insulated galvanized steel cabinet; stick pins ensure 1/2” insulation remains in place. Unit ships with disposable filter.
Modular Electric Heat Kits
Heat kits available with either circuit breakers or terminal blocks. Available in 3, 5, 8, & 10 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory installed. Controls are accessible from the front for easy service. Electrical connections can be made from the top or left. Disconnect does not protrude through the wall panel. Fan time delay relay standard for increased efficiency.
Blower
Direct drive multi-speed blowers circulate air quietly and efficiently. Motor speeds can be easily selected via motor terminals. Swing mounted blowers can be easily removed for service.
Electronic Circuit Board
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil.
DX Coil
High-efficiency rifled copper tubes/enhanced aluminum fins provide maximum heat transfer. All coils immersion tested at 500 psi then nitrogen-pressurized and factory sealed for maximum reliability. Liquid-line Schraderallows pre-installation pressure testing. Available with either check style flow rater or TXV metering device. Field-installable TXVs are also available.Galvanized metal drain pan with bottom primary and secondary drain connections or alternate right side primary. All connections 3/4” FPT. Access door allows for coil cleaning.
Model Number(s) | AAW244000FCS05 |
Brand | Aspen |
Category | Air Handlers |
Ton | 2.0 Ton |
Voltage | 208/230V |
Electrical Phase(s) | 1-Phase |
Amp(s) | 25 |
Blower | Multi-Speed |
Maximum CFM | 930 |
Refrigerant Type | R-410A |
Height (Inches) | 37 1/2 |
Width (Inches) | 22 |
Depth (Inches) | 18 3/4 |
Total Shipping Weight (lbs.) | 90 |
Parts Warranty (Years) | 10 |
Compressor Warranty (Years) | 10 |
UPC # | 646341770747 |