3.5 Ton 15 Seer Bryant Heat Pump System is available to buy in increments of 1
Description
The Bryant 215B Heat Pump provides a collection of features unmatched by any other family of equipment. The 215B has been designed utilizing Bryants Puron refrigerant. The environmentally sound refrigerant allows consumers to make a responsible decision in the protection of the earth's ozone layer.This product has been designed and manufactured to meet EnergyStar criteria for energy efficiency when matched with appropriate coil components. Refer to the combination ratings in the ProductData for system combinations that meet Energy Star guidelines.
Standard Features:
Microtube Technology refrigeration system
Indoor air quality accessories available
13 SEER base up to 14.5 SEER/ 10.5 - 12.5 EER/ 7.7 - 8.2 HSPF
Sound level as low as 69 dBA
System supports Edge Thermidistatt or standard thermostat controls
Puron refrigerant - environmentally sound, won't deplete the ozone layer and low lifetime service cost
Scroll compressor
Internal pressure relief valve
Internal thermal overload
High pressure switch
Loss of charge switch
Filter drier
Balanced refrigeration system for maximum reliability
DuraGuardt protection package:
Solid, durable sheet metal construction
Dense wire coil guard available(3-phase units come standard with dense wire coil guard)
Baked-on powder paint
Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft.(24.38 m) evaporator above condenser (See Longline Guide for more information.)
Low ambient (down to -20_F/-28.9_C) with accessory kit
The Bryant FX4D Air Handler combines the proven technology of Bryant fan coil units with Puron, the environmentally sound refrigerant. These fan coils are loaded with popular features. Factory-installed, refrigerant-specific thermostatic expansion valves (TXV) are standard with these fan coil designs. The designs feature contoured condensate pans with rugged, drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.
Standard features include grooved copper tubing and louvered aluminum fins. The large face areas of the refrigerant coils provide superior efficiency for high SEER and HSPF performance. Coil circuiting has also been updated to make the most of all Bryant heat pumps and air conditioners. Also units come with solid state fan controls, 1-in (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory- and/or field-installed heaters from 3 to 30kW.
It also should be noted that the unique cabinet design of these fan coils meet new stringent regulations for cabinet air leakage - a requirement of 2 cabinet leakage rate when tested at 1.0 inches of static pressure.
The FX4D fan coil is the Puron refrigeration design loaded with popular features. It comes in a pre-painted (taupe metallic) galvanized steel casing and is shipped with a cleanable, permanent framed filter, and a factory-supplied power plug. DuraCoatt provides a tin plating of the indoor coilž˘s copper hairpins. This creates a barrier between the corrosion-causing elements and the coil. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors.
Standard Features:
Multi-tap ECM (electronic commutating motor) motors - all sizes
Integrated motor controls have replaced integrated circuit board
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements