The Bryant 215B Heat Pump provides a collection of features unmatched by any other family of equipment. The 215B has been designed utilizing Bryants Puron refrigerant. The environmentally sound refrigerant allows consumers to make a responsible decision in the protection of the earth's ozone layer.This product has been designed and manufactured to meet EnergyStar criteria for energy efficiency when matched with appropriate coil components. Refer to the combination ratings in the ProductData for system combinations that meet Energy Star guidelines.

Standard Features:

• Microtube Technology refrigeration system
• Indoor air quality accessories available
• 13 SEER base up to 14.5 SEER/ 10.5 - 12.5 EER/ 7.7 - 8.2 HSPF
• Sound level as low as 69 dBA
• System supports Edge Thermidistatt or standard thermostat controls
• Puron refrigerant - environmentally sound, won't deplete the ozone layer and low lifetime service cost
• Scroll compressor
• Internal pressure relief valve
• Internal thermal overload
• High pressure switch
• Loss of charge switch
• Filter drier
• Balanced refrigeration system for maximum reliability
• DuraGuardt protection package:
• Solid, durable sheet metal construction
• Dense wire coil guard available(3-phase units come standard with dense wire coil guard)
• Baked-on powder paint
• Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft.(24.38 m) evaporator above condenser (See Longline Guide for more information.)
• Low ambient (down to -20_F/-28.9_C) with accessory kit

The Bryant FX4D Air Handler combines the proven technology of Bryant fan coil units with Puron, the environmentally sound refrigerant. These fan coils are loaded with popular features. Factory-installed, refrigerant-specific thermostatic expansion valves (TXV) are standard with these fan coil designs. The designs feature contoured condensate pans with rugged, drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.

Standard features include grooved copper tubing and louvered aluminum fins. The large face areas of the refrigerant coils provide superior efficiency for high SEER and HSPF performance. Coil circuiting has also been updated to make the most of all Bryant heat pumps and air conditioners. Also units come with solid state fan controls, 1-in (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory- and/or field-installed heaters from 3 to 30kW.

It also should be noted that the unique cabinet design of these fan coils meet new stringent regulations for cabinet air leakage - a requirement of 2 cabinet leakage rate when tested at 1.0 inches of static pressure.

The FX4D fan coil is the Puron refrigeration design loaded with popular features. It comes in a pre-painted (taupe metallic) galvanized steel casing and is shipped with a cleanable, permanent framed filter, and a factory-supplied power plug. DuraCoatt provides a tin plating of the indoor coilž˘s copper hairpins. This creates a barrier between the corrosion-causing elements and the coil. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors.

Standard Features:

• Multi-tap ECM (electronic commutating motor) motors - all sizes
• Integrated motor controls have replaced integrated circuit board
• Large, grooved tube, louvered fin coils
• Efficient, quiet, time-tested blower housings and diffusers
• Sturdy, drainable condensate pans
• Cabinet construction features innovations designed to prevent cabinet sweating
• Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
• Super-thick R-4.2 insulation with vapor barrier
• Pre-painted galvanized steel cabinet (taupe metallic)
• Cabinet design meets stringent regulations for 2 cabinet leakage rate when tested at 1.0 inches static pressure
• Installation-flexible, multipoise units
• Horizontal hanging provisions on cabinet
• No tools required to service filter
• Factory-supplied, cleanable and reusable filter
• Newly improved filter rack area filter door insulation added for improved air seal
• Factory-installed heater packages available (5- through 15-kW)
• 3- through 30-kW accessory heaters - field installed
• Factory-supplied power plug
• Easy plug-in provisions for heater installation
• Entry options for high and low voltage wiring hook-up
• Simple, 5-amp blade fuse (and a spare) to protect 40 VA transformer
• Easy coil inspection (removable, snap-in plug on A-coil models)
• Leak-preventing sweat connections
• Modular cabinets available on 037 through 061 sizes.
• Designed for manufactured housing applications.

Additional Features:

• Puron, environmentally sound refrigerant
• Factory-installed Puron refrigerant thermostatic expansion valves (TXV)
• Factory-installed heater packages available
• DuraCoatt coil protection available