The Goodman® Brand SSX16 High-Efficiency Air
Conditioner uses R-410A chlorine-free
refrigerant and features energy
efficiencies and operating sound levels that are among the best
in the heating and cooling industry. The SSX16 features a
high-efficiency Copeland® scroll compressor and is designed for
the consumer who desires superior comfort, quiet operation,
and performance.
Product Features:
- R-410A chlorine-free refrigerant
- High-efficiency Copeland scroll compressor
- High-quality compressor sound cover
- High-pressure switch; low-pressure switch
- Factory-installed filter dryer
- 850-RPM condenser fan motor
- Copper tube/enhanced aluminum fin coil
- Sweat connection service valves with easy access to gauge
ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
Cabinet Features:
- Goodman sound control top design
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-
hour
salt-spray approval
- Top and side compressor and tubing access
- Single-panel access to controls with space provided for
field-installed accessories
- When properly anchored, meets the 2001 Florida Building Code
unit integrity
requirements for hurricane-type winds (Anchor bracket kits
available.)
CAPF, CAUF, CHPF and CSCF Dual Refrigerant
Series Cased, Painted Upflow/Downflow, Horizontal/Vertical
“A” Coils
Goodman® coils are designed for use with Goodman® Brand
Gas Furnaces, Split System Air Conditioners and Heat Pumps, as
well as modular, two-piece blowers. Each cased coil has a
quality, galvanized-steel cabinet.
Standard Features:
- Suitable for use with R-410A and R-22
refrigerants
- Rust-proof, thermoplastic drain pans feature a low
water-retention design
- Check flowrater expansion device for heat pump or
cooling-only applications
- Rifled copper tubing and louvered aluminum fin coils
on CAPF, CAUF, and CSCF coils
- Rifled aluminum tubing and louvered aluminum fin
coils on the CHPF coil
Cabinet Features:
- Foil-face insulation
- Galvanized leather-grain finish
- Architectural Gray paint finish on CAPF and CHPF
cased coils
- Split-seam front for easy access
- 17½”, 21”, and 24½”
CHPF coils have one 3½” adapter plate
- 17½”, 21”, and 24½”
CAPF coils have two 1¾” adapter plates
The Goodman® GMVC95 Two-Stage, Variable-Speed Gas
Furnace features a patented aluminized-
steel tubular heat exchanger and energy-efficient Hot Surface
Ignition system. This furnace is run-tested for heating or
combination heating/cooling applications. Goodman’s GMVC95 high
efficiency gas
furnace with two-stage heating and a variablespeed
circulating blower provides efficient and
economical performance. The 95% AFUE GMVC95 qualifies for the new
2011 $200 energy tax credit.
Standard Features:
- Dual-diameter tubular heat exchanger
- Two-stage gas valve operates with two-stage or singlestage
thermostats
- ComfortNet™ Communications System compatible
- Efficient and quiet variable-speed ECM circulator motor
gently
ramps up or down according to heating or cooling demand
- 120V Silicon Nitride igniter designed for long igniter life
- Furnace control board with self-diagnostics, color-coded
low-voltage terminals, and provisions for electronic air
cleaner and 120-volt or 24-volt humidifiers
- Low constant fan allows homeowner to activate very low
speed to efficiently circulate air throughout the home. This
setting costs as little as a 100-watt light bulb to operate.
- Dual-certified for sealed combustion direct vent (2-pipe)
or non-direct vent (1-pipe) applications
- Quiet two-speed induced draft blower
- All models comply with California NOx emissions standards
Cabinet Features:
- Fully insulated, heavy-gauge steel
cabinet with durable
baked-enamel finish
- Foil-faced insulation lines the heat exchanger
- Easy-to-install top venting is standard; alternate flue/vent
connections on some models
- Designed for multi-position installation –
GMVC95: upflow, horizontal left or right;
GCVC95/9: downflow, horizontal left or right
- Airtight solid bottom for side return applications and easy-
cut
tabs for effortless removal in bottom air inlet applications
- Convenient left or right connection for gas/electric service
- Coil and furnace fit flush for most installations
|
