The Goodman® Brand SSX14 High-Efficiency
Air Conditioner uses R-410A chlorine
-free refrigerant and features operating sound levels that are
among the best in the heating and cooling industry. The SSX14
features a high-efficiency Copeland® scroll compressor and
is designed for the consumer who desires superior comfort, quiet
operation, and performance.
Product Features:
- R-410A chlorine-free refrigerant
- High-efficiency Copeland scroll compressor
- High-quality compressor sound cover
- High-pressure switch; low-pressure switch
- Factory-installed filter dryer
- 850-RPM condenser fan motor
- Copper tube/enhanced aluminum fin coil
- Service valves with sweat connections and easy-
access gauge ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
Cabinet Features:
- Goodman sound control top design
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish
with 500-hour salt-spray approval
- Top and side maintenance access
- Single-panel access to controls with space
provided for field-installed accessories
- When properly anchored, meets the 2001 Florida
Building Code unit integrity requirements for hurricane-type
winds (Anchor bracket kits available.)
CAPF, CAUF, CHPF and CSCF Dual Refrigerant
Series Cased, Painted Upflow/Downflow, Horizontal/Vertical
“A” Coils
Goodman® coils are designed for use with Goodman® Brand
Gas Furnaces, Split System Air Conditioners and Heat Pumps, as
well as modular, two-piece blowers. Each cased coil has a
quality, galvanized-steel cabinet.
Standard Features:
- Suitable for use with R-410A and R-22
refrigerants
- Rust-proof, thermoplastic drain pans feature a
low water-retention design
- Check flowrater expansion device for heat pump or
cooling-only applications
- Rifled copper tubing and louvered aluminum fin
coils on CAPF, CAUF, and CSCF coils
- Rifled aluminum tubing and louvered aluminum fin
coils on the CHPF coil
Cabinet Features:
- Foil-face insulation
- Galvanized leather-grain finish
- Architectural Gray paint finish on CAPF and CHPF
cased coils
- Split-seam front for easy access
- 17½”, 21”, and
24½” CHPF coils have one 3½” adapter
plate
- 17½”, 21”, and
24½” CAPF coils have two 1¾” adapter
plates
The Goodman® GMVC95 Two-Stage, Variable-
Speed Gas Furnace features a patented
aluminized- steel tubular heat exchanger and energy-efficient
Hot Surface Ignition system. This furnace is run-tested for
heating or combination heating/cooling applications.
Goodman’s GMVC95 high efficiency gas furnace with two-
stage heating and a variable-speed circulating blower provides
efficient and economical performance. The 95% AFUE GMVC95
qualifies for the new 2011 $200 energy tax credit.
Standard Features:
- Dual-diameter tubular heat exchanger
- Two-stage gas valve operates with two-stage or
singlestage thermostats
- ComfortNet™ Communications System
compatible
- Efficient and quiet variable-speed ECM circulator
motor gently ramps up or down according to heating or cooling
demand
- 120V Silicon Nitride igniter designed for long
igniter life
- Furnace control board with self-diagnostics,
color-coded low-voltage terminals, and provisions for electronic
air cleaner and 120-volt or 24-volt humidifiers
- Low constant fan allows homeowner to activate
very low speed to efficiently circulate air throughout the home.
This setting costs as little as a 100-watt light bulb to
operate.
- Dual-certified for sealed combustion direct vent
(2-pipe) or non-direct vent (1-pipe) applications
- Quiet two-speed induced draft blower
- All models comply with California NOx emissions
standards
Cabinet Features:
- Fully insulated, heavy-gauge steel cabinet with
durable baked-enamel finish
- Foil-faced insulation lines the heat
exchanger
- Easy-to-install top venting is standard;
alternate flue/vent connections on some models
- Designed for multi-position installation –
GMVC95: upflow, horizontal left or right; GCVC95/9: downflow,
horizontal left or right
- Airtight solid bottom for side return
applications and easy- cut tabs for effortless removal in bottom
air inlet applications
- Convenient left or right connection for
gas/electric service
- Coil and furnace fit flush for most
installations
|
