The Rheem Prestige Series™ High Efficiency RAPM- JEZ Condensing Units were designed with performance in mind. These units offer comfort, energy conservation and dependability for single, multi-family and light commercial applications. These units also contain the most advanced alternate refrigerant which contains no chlorofluorocarbons (CFCs), or hydrochlorofluorocarbons (HCFCs), or other compounds that may leak from airconditioning systems and potentially harm the protective ozone layer of the Earth’s atmosphere. The Rheem Prestige Series™ RAPM- JEZ Condensing Units are the result of an ongoing development program for improved efficiencies. These units are flexible enough to achieve up to 16.00 SEER in specific match-ups, continuing a tradition of high efficiency.
Product Details:
The Comfort Control System™ provides on-board diagnostics and fault history for condensing units with single-phase compressors by detecting system and electrical problems without adding sensors. It can also communicate “fault codes” to enabled “L terminal” thermostats. The integrated diagnostics with Active Protection™ prevents compressor operation when potentially harmful conditions are detected.
7-Segment LED Display is exclusive only to Rheem products. The information-display quickly and accurately shows technicians the source of malfunctions.
Features a five-year conditional unit replacement warranty when properly installed with a new Rheem Air Handler or Rheem Indoor Coil with a Rheem Gas Furnace. See product warranty card for additional information.
Compressor sound blanket is standard to provide quiet operation.
Attractive, louvered wrap-around jacket protects the coil from yard hazards and weather extremes. Top grille is steel reinforced for extra strength. Cabinet is powder painted for allweather protection.
Air is discharged upward away from bushes and shrubs. The discharge pattern of the top grille provides minimum air restriction.
Combination Grille/Motor Mount secures the motor to the underside of the discharge grille. The grille protects the motor windings and bearings from rain and snow.
Removable top grille provides access to the condenser fan motor and condenser coil.
Single speed 8-pole fan motor designed for low speed, quiet, energy-saving operation.
All models meet or exceed a 1000-hour salt spray test per ASTM B117 Standard Practice for Operating Salt Spray Testing Apparatus.
The Rheem RHLL Series Air Handler
Product Details:
RHLA/RHLL Series feature GE’s new X-13 motor which provides enhanced SEER performance with most Rheem outdoor units.
11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
Factory-installed high efficiency indoor coil.
All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
Enhanced airflow up to .7" external static pressure.
Sturdy construction with 1.0 inch [.24 kPa] of reinforced foil faced jacket insulation for excellent thermal and sound insulation.
Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet UL and cUL requirements for service disconnect
Engineering Features of the RHLA/RHLL/RHSA/RHSL Series
The most compact unit design available, all standard heat air handler models only 421/2 to 551/2 inches [1079 to 1409 mm] high.
Attractive pre-painted cabinet exterior.
Rugged wall steel cabinet construction, designed for added strength and versatility.
1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance.
Four leg blower motor mount.
Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience.
Traditional open wire element design for heat applications.
Field convertible for vertical downflow, horizontal left hand or right hand air supply.
3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors.
Indoor coil design provides low air side pressure drop, high performance and extremely compact size.
Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil.
Coils are constructed of aluminum fins bonded to internally grooved copper tubing.
Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
Supply duct flanges provided as standard on air handler cabinet.
Provisions for field electrical, connections available from either side or top of the air handler cabinet.
Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet.
Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches [51 mm] for 11/2 inch [38 mm] conduit.
Front refrigerant and drain connections. |
