The Amana® Brand ASZ14 Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 14 SEER rating, the ASZ14 will reduce energy consumption throughout the life of the system compared to US federal minimum efficiency standards for 13 SEER products.
Standard Features:
- R-410A environmentally friendly refrigerant
- High-efficiency Copeland® scroll compressor
- High-density foam compressor sound blanket
- Copeland® ComfortAlert diagnostics
- High and low pressure switches
- Fully charged for 15’ of tubing length
- Factory installed bi-flow liquid line filter dryer
- Liquid refrigerant return protection
- Two-speed condenser fan motor
- Copper tube/enhanced aluminum fin coil
- Sweat connection service valves with easy access to gauge ports
- ARI Certified; ETL Listed
Cabinet Features:
- Unique Amana® brand sound control top design
- Wire fan discharge grille
- Steel louver coil guard
- Baked-on powder paint finish
- Rust-resistant screws
- Compact footprint
- Top and side maintenance access
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
CAPF, CAUF, CHPF and CSCF Dual Refrigerant Series Cased, Painted Upflow/Downflow, Horizontal/Vertical “A” Coils
Amana® coils are designed for use with Amana® Brand Gas Furnaces, Split System Air Conditioners and Heat Pumps, as well as modular, two-piece blowers. Each cased coil has a quality, galvanized-steel cabinet.
Standard Features:
- Suitable for use with R-410A and R-22 refrigerants
- Rust-proof, thermoplastic drain pans feature a low water-retention design
- Check flowrater expansion device for heat pump or cooling-only applications
- Rifled copper tubing and louvered aluminum fin coils on CAPF, CAUF, and CSCF coils
- Rifled aluminum tubing and louvered aluminum fin coils on the CHPF coil
Cabinet Features:
- Foil-face insulation
- Galvanized leather-grain finish
- Architectural Gray paint finish on CAPF and CHPF cased coils
- Split-seam front for easy access
- 17½”, 21”, and 24½” CHPF coils have one 3½” adapter plate
- 17½”, 21”, and 24½” CAPF coils have two 1¾” adapter plates
The Amana® Brand AMVC95 Two-Stage, Variable-Speed Gas Furnace features a patented MillionAir® stainless-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. This furnace is run-tested for heating or combination heating/cooling applications. The 95% AFUE AMV95 qualifies for the new 2011 $200 energy tax credit.
Million-Air® Heat Exchanger
The heart of your Amana brand furnace is its Million-Air stainless-steel tubular heat exchanger. Formed using our dual-diameter pipe and wrinklebend technologies, the Million-Air is built to last. One of these heat exchangers has endured over two million extreme-temperature test cycles in our laboratory and is still going strong. The durability of this heat exchanger is one of the reasons we know your Amana brand furnace will last for years to come.
Standard Features:
- MillionAir® stainless-steel, dual-diameter tubular heat exchanger
- Two-stage gas valve operates on two-stage or single-stage thermostats
- ComfortNet™ Communications System compatible
- Efficient and quiet variable-speed ECM circulator motor gently ramps up or down according to heating or cooling demand
- SureStart® Silicon Nitride igniter designed for long igniter life
- Furnace control board with self-diagnostics, color-coded low-voltage terminals, and provisions for electronic air cleaner and 115-volt or 24-volt humidifiers
- Low constant fan allows homeowner to activate very low speed to efficiently circulate air throughout the home. This setting costs as little as a 100-watt light bulb to operate.
- Dual-certified for sealed combustion direct vent (2-pipe) or non-direct vent (1-pipe) applications
- Easy-to-install top venting is standard; alternate flue/vent locations available
- Quiet, two-speed induced draft blower
- All models comply with California NOx emissions standards
Cabinet Features:
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Designed for multi-position installation — AMVC95: upflow, horizontal left or right ACVC95: downflow, horizontal left or right
- Airtight solid bottom for side return applications & easy-cut tabs for effortless removal in bottom air inlet applications
- Convenient left or right connection for gas/electric service
- Coil and furnace fit flush for most installations
|
