1.5 TON 13 SEER GIBSON AIR CONDITIONER WITH HEAT PUMP (R-22)
The Gibson 1.5 Ton 13 SEER R-22 Air Conditioner Heat Pump System is suitable for southern home comfort where heating is needed. Heat Pump Systems are most effective when the outside temperature is 45*F or warmer. These systems are known for energy efficiency and excellent comfort. They are ideal for warm-winter climates in the southern USA where temperatures rarely fall below 25*F. Heat Pumps are not effective when the outside temperature is below freezing temperature. In that case Gas Furnaces can be used as a heating system.
JT5BD Heat Pump Features and Benefits:
Warranty:

This product offers a 10 year all parts warranty.

This product offers a 1 Year Quality Pledge to replace the unit if the compressor fails in the first year of operation, to the original owner. All split system products must be installed with a matched indoor air handler or indoor coil.

Consumer product registration required for 10 year All Parts Warranty and Quality Pledge within a limited period of time after the installation.
Durable, Attractive Cabinet:

Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil. Thick and resist corrosion 50% better than comparable units.
Copper Tube / Aluminum Fin Coils:

Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, to increase durability and reliability.
Permanently Lubricated Motor:

A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow.
Full Service Valves:

These brass valves are easily accessible and simplify servicing of the refrigeration system.
Complete Metal Wrapper:

Protects the units coil from being damaged.
Removable Top Grille Assembly:

Allows ease of service from the top without disconnecting fan motor leads.
One Piece Top/Orifice:

Designed for maximum airflow and quiet operation.
2 ½” Pedestal Base:

The sturdy base keeps the bottom of coil out of harm’s way. Weep holes along edge of the base allow rainwater to flow away from the unit.
Easy Compressor and Control Access:

Designed to make servicing easier for the contractor access panels are provided to all controls and the compressor from the side of the unit.

GB5(B) Series Air Handler Features and Benefits:
Warranty:

This product offers a 10 year all parts warranty.

Consumer product registration required for 10 year All Parts Warranty and Quality Pledge within a limited period of time after the installation.
Durable, Attractive Cabinet:

Designed using galvanized steel. The door is also galvanized steel, with a polyester urethane finish. The 950 hour salt spray finish resist corrosion 50% better than comparable units. The plastic drain pan is corrosion-resistant.
Multi-Speed:

Gives flexibility of installation

Can be used in vertical application ONLY
Ease of Service:

Plug-in wire connections and built in filter rack makes the air handler easy to service.
Plug-in Heater Kits:

Available in 5 kW- 30kW (Not for use in 115 volt units)
Circuit Board:

Incorporating blower time delay relay, low voltage terminal strip, and heat strip sequencing.
Air Handler Control Board:

Controls time-sequencing of heat stages with field-selectable sequence timing.
Breaker Accessibility:

Breaker Accessible from front of unit when heater is applied.
No Fasteners on Sides or Back:

Smooth surfaces for ease of installation

ETL Certified, ARI Performance Certified and Energy Saving Star